Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Zeroflame

There are 6 products.

Showing 1-6 of 6 item(s)

Active filters

Zeroflame Aquasteel WB+ 30min System for Steel

This pack provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteel WB+ Finish) to protect suitably primed, standard structural steel beams and columns in internal environments to 30 minute fire resistance.

Price £115.03
In stock

Zeroflame Aquasteel WB+ 60min System for Steel

This pack provides sufficient intumescent basecoat (Zeroflame Aquasteel WB+) and coloured topcoat (Zeroflame Aquasteel WB+ Finish) to protect suitably primed, standard structural steel beams and columns in internal environments to 60 minute fire resistance.

Price £115.03
In stock

Zeroflame Aquasteel WB+ Finish

Zeroflame Aquasteel WB+ Finish is a hard-wearing flame-retardant topcoat for application over Zeroflame Aquasteel WB+ Intumescent Coating: Class 0 fire rated finish on bare or previously painted non-combustible surfaces Hard wearing, water-based acrylic eggshell or solvent-based gloss finish High coverage rates Wide colour range options...

Price £55.00
In stock

Zeroflame Aquasteel WB+

Zeroflame Aquasteel WB+ is a White Intumescent Coating that is ideal for smaller fireproofing jobs on steel. Achieves 30 and 60 mins' fire resistance on structural steel profiles Tested to internationally accepted standards BS476 Parts 20 and 21 Certificate application included Fast drying Apply by brush, roller or airless spray...

Price £60.03 Regular price £66.70
In stock

Zeroflame Fire Retardant Treatment

Zeroflame Fire Retardant Treatment is for use on wood and timber: Soaks virtually ‘invisibly’ into woods and timber Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers Can be overcoated for decorative purposes For internal and external use Certificate application included Remains...

Price £130.94 Regular price £145.49
In stock

Zeroflame Fire Retardant Paint

Zeroflame Fire Retardant Paint is a matt white, single-pack waterborne coating for wood, and other wood derivatives that achieves Class 1 and Class 0. Achieves the equivalent to Class 0 and Class 1 to EU Standard EN13501-1:2007 Can be over-coated with waterbased latex paints Certificate included in each container Internal use Simple to...

In stock