Envirograf Protector for Etched or Stained Glass
Envirograf Protector for Etched or Stained Glass holds protective glass panels in front of priceless etched windows and stained glass, protecting against vandalism. The protectors give up to 30 or 60 minutes fire protection depending on the rating of fire glass used, and the rail will hold clear Georgian wire glass, laminated glass or ceramic fire rated glass.
|GP1||Brown/White||Per 1050mm length|
|GP2||Brown/White||Per 2100mm length|
Curved sections, ideal for church windows, can be made to order, as well as other colours and sizes - contact our sales team on 0113 245 5450 for more information.
Where decorative glass or plain glass windows require 30 minute or 60 minute fire protection, Envirograf® have developed a metal trim to surface mount onto the risk side of the partition or door to take Northern Wired Plain Clear – 6mm – 30 minute glass or Pilkington Clear Wired Glass for 60 minute protection and CGI Glass.
Refer to the Application Guide, in our download section below, for more and further information on installation.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!