"

Jotun Penguard FC

Jotun Penguard FC View larger
Typical Coverage (per coat)6.2m² per litre
Touch Dry2.5 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Jotun Penguard FC is a two component polyamide cured high molecular weight epoxy coating that has a semi gloss finish with fair gloss retention. It is a high solids product that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. To be used as a topcoat in atmospheric environments.

Read Full Description

More details

£61.07 + VAT

Jotun Penguard FC is a two component polyamide cured high molecular weight epoxy coating that has a semi gloss finish with fair gloss retention. It is a high solids product that can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. To be used as a topcoat in atmospheric environments.

Areas of Use
Marine: Recommended for all non immersed areas.
Protective: Suitable for a wide range of industrial structures.

Approvals and certificates

  • Low flame spread certificate acording to IMO/Solas directive
  • Grain, Newcastle Ocupational Health

Additional certificates and approvals may be available on request.

Features & Benefits

  • High build
  • Very good chemical resistance
  • High volume solids

Primers
Jotun Penguard FC will form a long lasting corrosion protection system together with primers like Barrier, Resist, Jotamastic, Penguard and Jotacote for a wide range of purposes.

High build
A maximum DFT of 200 microns will provide you with a better barrier protection.

Chemical resistance
The epoxy binder ensures resistance against different types of chemicals, providing long lasting protection of your property.

High volume solids
High volume solids compared to traditional epoxy finish coats results in lower VOC (volatile organic compounds) per litre, and thus is a modern solution with low environmental impact.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Penguard FC TDS

Download

Penguard FC Comp A MSDS

Download

Penguard FC Comp B MSDS

Download

Penguard FC Application Guide

Download