Follow us on:

Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Suitable For Use On

Suitable For Use On

Colour Family

Colour Family

Size

Size

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Marine Paint

Painting your boat, whether it’s personal or commercial, fresh or sea water vessel, doesn’t have to be complicated, and it doesn’t have to be expensive. Rawlins Paints stock a wide range of marine paint products, including deck paint, anti-fouling paint, bilge paint, marine gloss, boot-topping, ice breaker low friction coatings and more.

There are 13 products.

Showing 1-12 of 13 item(s)

Active filters

  • Brand: International
  • Brand: Zinga
  • Colour Family: Grey

International Interprime 198

A quick drying, one pack alkyd primer, Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.For the maintenance of above water areas Approved for the carriage of grain when used as part of an approved scheme For use at Maintenance & Repair or On Board Maintenance...

Price £63.85 (ex. VAT)

£76.62 (incl. VAT)

£63.85 (ex. VAT)

In Stock and Available for Delivery

International Interzone 954

International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.A high film build, high...

Price £137.77 (ex. VAT)

£165.32 (incl. VAT)

£137.77 (ex. VAT)

In Stock and Available for Delivery

International Interzone 954 (Rapid Cure)

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...

Price £137.77 (ex. VAT)

£165.32 (incl. VAT)

£137.77 (ex. VAT)

In Stock and Available for Delivery

International Interzone 1000

International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.

Price £648.14 (ex. VAT)

£777.77 (incl. VAT)

£648.14 (ex. VAT)

In Stock and Available for Delivery

Zinga Zingalufer

Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure.Apply by brush, roller, conventional sprayers or airless spray One pack system Dry in as little...

Price £40.95 (ex. VAT)

£49.14 (incl. VAT)

£40.95 (ex. VAT)

In Stock and Available for Delivery

International Interzone 954GF

International Interzone 954GF is a high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake for enhanced durability, abrasion and corrosion protection with excellent cathodic disbondment performance.For the protection of steelwork in areas where high abrasion and corrosion...

Price £610.51 (ex. VAT)

£732.61 (incl. VAT)

£610.51 (ex. VAT)

In Stock and Available for Delivery

International Intergard 5000

International Intergard 5000, a 2 part universal epoxy anti-corrosive primer for use as a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.Certified for approved...

Price £484.95 (ex. VAT)

£581.94 (incl. VAT)

£484.95 (ex. VAT)

In Stock and Available for Delivery

International Intershield 851

International Intershield 851, a two pack high solids, coarse texture non skid epoxy coating used as a non-skid flight deck coating and can also be used on any other deck or walkway subject to heavy wear.Externally approved to DEF STAN 80-134 Type 2 (by the UK MOD) Durable corrosion resistant system with excellent operational image and...

Price £300.13 (ex. VAT)

£360.16 (incl. VAT)

£300.13 (ex. VAT)

In Stock and Available for Delivery

International Intergard 263

International Intergard 263, a two pack, tar free, epoxy tie coat for use between anticorrosives and either antifoulings or cosmetic finishes, ensuring maximum system adhesion and performance on outside shell vessel areas.Use as a sealer coat over Tributyltin (TBT) antifoulings For use at newbuilding, maintenance & repair or on board...

Price £334.96 (ex. VAT)

£401.95 (incl. VAT)

£334.96 (ex. VAT)

In Stock and Available for Delivery

International Intergard 343

International Intergard 343, is a light coloured, aluminium pure epoxy universal primer with good corrosion protection and abrasion resistance and low temperature application capability.As a universal primer which can be applied directly to mechanically prepared shop primer Suitable for use with controlled cathodic protection For use at...

Price £376.35 (ex. VAT)

£451.62 (incl. VAT)

£376.35 (ex. VAT)

In Stock and Available for Delivery

International Intershield 803

International Intershield 803, a two pack, abrasion resistant pure epoxy coating with excellent mechanical properties for to limit mechanical damage and subsequent corrosion in maintenance & repair.Excellent abrasion resistance Suitable for use with controlled cathodic protection For vessel areas other than underwater hull, can be...

Price £878.98 (ex. VAT)

£1,054.78 (incl. VAT)

£878.98 (ex. VAT)

In Stock and Available for Delivery

International Intertuf 262

International Intertuf 262 is a surface tolerant, two pack epoxy primer.As an epoxy anticorrosive coating for use from keel to rail Suitable for use with controlled cathodic protection For use at newbuilding, maintenance & repair or on board maintenance Certified for:Food Contact - Carriage of Grain (NOHH) Fire Resistance -...

Price £334.96 (ex. VAT)

£401.95 (incl. VAT)

£334.96 (ex. VAT)

In Stock and Available for Delivery

Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Suitable For Use On

Suitable For Use On

Colour Family

Colour Family

Size

Size

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Need Help?

Painting your boat, whether it’s personal or commercial, fresh or sea water vessel, doesn’t have to be complicated, and it doesn’t have to be expensive. Rawlins Paints stock a wide range of marine paint products, including deck paint, anti-fouling paint, bilge paint, marine gloss, boot-topping, ice breaker low friction coatings and more.

Our ethos is to offer lesser known brands that do not compromise on a quality finish, meaning we can offer products that work at a fraction of the cost of market leaders.

Marine Gloss Paints

Teamac boat paint comes in several types, including Teamac Marine Gloss and Teamac Antifoul paint. Teamac’s marine gloss is a superior marine coating with a high gloss finish, suitable for lots of different marine areas above the water line, including masts, bridge fronts and deck work. It’s available in assorted colours and should be applied by roller or brush.

If you’re looking for a yacht varnish, then Teamac Teamalak yacht varnish is a good choice. It can be used on all wood surfaces where you need a high gloss, UV resistant finish. This could include furniture on deck or woodwork on the outside of the yacht.

Jotun Spontan Varnish is an easy to use, one component coating with a gloss finish, making it an ideal marine varnish choice. As with many of our marine coatings (but not all, so make sure you check!), Spontan can be applied as a spray or with a brush.

Marine Topcoats

Teamac High Performance Finish is a two-pack top coat that will increase the durability of wood, metal and GRP surfaces on your vessel. It’s specifically designed as a marine topcoat and consists of a basecoat and hardener available in lots of assorted colours.

For a combined primer and topcoat for use on marine metal, select Teamac Duracote Red Oxide paint. It’s a general-purpose coating for metal and can be used inside and outside, so it’s perfect for lots of different marine uses.

Deck Coats

It’s important to find the right anti slip deck coating to ensure safety on deck. Teamac Suregrip Deck Paint is a specifically formulated deck coating for sea faring vessels. Already mixed and aggregated, Suregrip deck paint gives a rough anti-slip finish, making it safe for crew members to walk on deck even in rough seas. Available in lots of distinct colours, Suregrip can only be applied with a brush and is suitable for use on metal, wood, concrete and GRP.

Alternatively, Teamac Deck Paint Smooth is a protective coating designed to increase the durability and lifespan of wood, metal and GRP decks. Before you apply this deck paint, you need to make sure the surfaces are dry, clean and free from any contaminants, and if you are applying directly onto GRP you’ll need to abrade the surface before spraying, brushing or rolling the deck paint.

Boot-Topping Paints

Boot-topping paint products are used to paint the area of a hull between the load line and the waterline of a vessel. It’s specifically formulated to provide antifouling qualities in that it’s less receptive to marine growth. It’s also polishable so it’s easy to clean. Teamac Boot-topping paint is a very hard-wearing finish and is water and weather resistant. It can be used directly onto GRP surfaces, but others will have to be primed and prepared properly with a suitable primer product.