Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 168 products.
Active filters
Rust-Oleum Heat Resistant Paint 750°C, heat resistant coatings based on a silicone modified alkyd resin. Self-priming - should not be applied on primers or coatings that are not heat resistant.Ideal for BBQs and barbecue grills, fireplace equipment, space heaters, boiler fittings, hot air cannons, exhausts, engines, heat cannons, pipes,...
£29.78 (incl. VAT)
£24.82 (ex. VAT)
Anti Condensation Paint ideal for use on cold walls and ceilings in your home or office which may be susceptible to condensation, mould and heat loss. Other uses include steel frame buildings, metal cladding, garage roofs, shipping containers and as part of an underfloor heating system. For internal use only on walls and ceilings - Helps...
£23.80 (incl. VAT)
£19.83 (ex. VAT)
Carboline Windmastic HSX Repair Kit is two-pack reinforced high solid aliphatic polyurethane matt weathering resistant topcoat with excellent abrasion resistance for use on wind turbine rotor blades.Durable topcoat in combination with epoxy primer for long service life Fast curing Heat resistant up to 110°C continuous High solid, low...
£53.46 (incl. VAT)
£44.55 (ex. VAT)
Rust-Oleum Heat Resistant Paint 750°C Aerosols, heat resistant coatings in aerosols (7715/7778) based on a silicone modified alkyd resin. Self-priming - should not be applied on primers or coatings that are not heat resistant.Ideal for BBQs and barbecue grills, fireplace equipment, space heaters, boiler fittings, hot air cannons, exhausts,...
£14.84 (incl. VAT)
£12.37 (ex. VAT)
Jotun Solvalitt is a one component, physically drying silicone acrylic coating, heat resistant up to 600°C. Designed as a heat resistant coating suitable for insulated and non insulated surfaces, Solvalitt is recommended as a finish coat for insulated surfaces, in systems with suitable primers.Can be used as primer, mid coat or finish coat...
£126.02 (incl. VAT)
£105.02 (ex. VAT)
Sikagard 62, a two part, rigid, 100 % solids, coloured high build epoxy resin based protective coating that may only be used by experienced professionals. Solvent-free with good mechanical and chemical resistance, the coating is impervious to liquids and is easy to mix and to apply.Uses include:Chemical resistant protective layer on...
£299.23 (incl. VAT)
£249.36 (ex. VAT)
Coo-Var Heat Resistant Black Enamel is a high quality enamel for use at temperatures up to 600 deg c indirect heat. May be used as a single coat for fire surrounds, radiators, hot pipes and more.Heat resistant paint Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen Available in sizes...
£13.43 (incl. VAT)
£11.19 (ex. VAT)
Jotun Solvalitt Alu is a one component physically drying silicone acrylic coating that is an aluminium pigmented product leaving a metallic silver finish. It is heat resistant up to 600°C and can be used as a primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless...
£116.51 (incl. VAT)
£97.09 (ex. VAT)
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
£232.51 (incl. VAT)
£193.76 (ex. VAT)
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium...
£72.58 (incl. VAT)
£60.48 (ex. VAT)
Jotatemp 1000, formerly known as Jotatemp 1000 Ceramic, is resistant to low temperatures down to -196°C and high temperatures up to 1000°C continuously, where substrates allow. Can be used as primer or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, stainless steel and ceramic substrates. It can be applied...
£371.00 (incl. VAT)
£309.17 (ex. VAT)
Jotun Tankguard Storage is a two component novolac epoxy coating is a specially designed tank lining with excellent chemical resistance. It can be used as primer, mid coat and finish coat in atmospheric and immersed environments.Chemical resistant Resistant against crude oil up to 90°C Application of two coats in one day Flexible dry...
£251.74 (incl. VAT)
£209.78 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
This category contains special use paints and coatings that have specific properties for different environments and substrates. We pride ourselves on being able to offer the best product for the job and sometimes a project requires a very niche product to perform a specific function and that’s what you’ll find here. Chemical Resistant Paint for example can have a wide range of uses in all sorts of industries, from chemical resistant floor paint for aircraft hangar floors to chemical resistant steel coatings for pipelines in the desert. This category also contains tank coatings to be used on ships, grain silos, drinking water tanks and more, tank coatings can often require specialist application and measures to be taken in use so if you haven’t used them before it’s worth speaking to us first.
We’ll keeping adding to this category as we expand our ranges so keep checking for new and exciting additions!
Rawlins Paints are the UK’s leading industrial and specialist paint and coatings company, providing solutions for some of the most extreme environments and demanding workplace requirements – from fire retardant paints to heavy duty floor paints, and concrete repair materials to cladding paints. From time to time, there are scenarios and location conditions that even the leading manufacturers must produce specialist product lines with targeted deliverables for. These may be transportation and storage of chemically corrosive materials, or allowing major production companies to conduct repair and redecoration work in strictly monitored and climate controlled conditions where the temperature cannot be standardised for ‘normal’ paint application.
So, whilst we consider all our products to be special-use, this category really does cover the more extreme scenarios – offshore locations, power plants, breweries, dairies, pharmaceutical facilities, highway repairs in wintery conditions, and more.
Our help and advice promise
If you need any advice or guidance with your project, call our Technical Team to discuss what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
