A range of solvents to thin products and clean equipment, spray machines for application of our paints, paint test equipment, application equipment such as brushes and rollers and finally personal protective equipment such as face masks and gloves to compliment our range of paints and coatings.
Our solvents for our products are a critical part of the cleaning process either before or after application as well as thinning of the products where required. We offer a selected range of high quality Graco spray machines that can provide a professional finish for small projects right up to extended spray periods of heavy duty industrial coatings.
The paint test equipment we offer helps contractors test projects before an after application to aid their applicators or resolve issues that may occur. We have a large range of competitive application tools that are preferred by the professional tradesman and are chosen specifically to compliment our paints and coatings to ensure optimum application.
Finally our personal protective equipment provides mandatory safety measures to ensure safe application of our paints.
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety.Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...
505 Large Anti-Slip Aggregate is a specially formulated quartz aggregate to be added to various high build products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety.Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate...
508 Fine Particle Anti-Slip Additive is a micronized polymer bead ideal for providing a measure of slip resistance when added to coatings and sealers.Available in 3 grades125 micron 250 micron 500 micronNon-Toxic Controlled particle distribution gives uniform finish Easily incorporated to most coatings and sealers Economical...
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual productMore...
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Hempel's Thinner 08230 is a thinner for Hempalin qualities and other alkyd-based products (except Hempaquick qualities) .For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product...
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities.For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the productMore Information Delivery Info
Hempel Anti-Slint 67500 is flame dried silica sand of which the average particle size is approximately 0.5 millimetres.For professional use only Use to obtain anti-skid properties on decks and other areas where a skid-proof surface is required Should be sprinkled evenly on the surface immediately upon application of the penultimate coat...
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products.Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
A range of solvents to thin products and clean equipment, spray machines for application of our paints, paint test equipment, application equipment such as brushes and rollers and finally personal protective equipment such as face masks and gloves to compliment our range of paints and coatings.
Our solvents for our products are a critical part of the cleaning process either before or after application as well as thinning of the products where required. We offer a selected range of high quality Graco spray machines that can provide a professional finish for small projects right up to extended spray periods of heavy duty industrial coatings.
The paint test equipment we offer helps contractors test projects before an after application to aid their applicators or resolve issues that may occur. We have a large range of competitive application tools that are preferred by the professional tradesman and are chosen specifically to compliment our paints and coatings to ensure optimum application.
Finally our personal protective equipment provides mandatory safety measures to ensure safe application of our paints.