305 HD Clear Sealer is a hard-wearing solvent free, low odour clear sealer which provides a glossy, tack free surface, even under conditions of high humidity, and is effectively non-yellowing under the influence of UV light.Excellent adhesion to concrete and stonework Cures under cool, damp conditions Low viscosity, easily applied Good...
314 Clear Floor Sealer is a clear floor coating for suitably prepared concrete, wood, metal and GRP to help with the prevention of dusting.Single pack Internal or external use Ideal where a low cost sealer is required Touch dry in 4 hours @ 20 °C Semi-gloss finish
406 Floor Seal is a two pack, solvented epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance.The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio Sealer and surface hardener for...
Tikkurila Ensi Urethane Oil is an easy-to-use urethane oil which penetrates into concrete floors and walls, withstanding well abrasion, washing and chemicals.For oiling of concrete surfaces Penetrates into concrete without forming a protective film Withstands well abrasion and washing Resistant against petrol, spirits and lubrication...
Tikkurila Fontedur FL Matt is a two-component, water-borne polyurethane lacquer for treating concrete floors and walls, and as a top lacquer for Fontefloor and Temafloor epoxy and polyurethane floors, that can also be used for dust binding. The product does not darken concrete or filler-treated surfaces and can be tinted to create...
Tikkurila Fontefloor EP Clear is a two-component water-borne epoxy lacquer for concrete surfaces, used in hospitals and the pharmaceutical industry for coating of floors and recommended for moderate mechanical and chemical stress in industrial, workshop and storage facilities.Multi-purpose lacquer Creates a glossy surface Can be cleaned...
Tikkurila Temafloor 210 Clear is a solvent-free varnish used for dust binding, priming and topcoating especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand.Good resistance against abrasion, oils and grease. Also for dust binding and priming of new and old concrete...
Tikkurila Temafloor 25 Clear is a one-component moisture curing polyurethane primer and topcoat with excellent resistance to abrasion.Easy to apply due to one component formulation Temafloor 25 Clear is dust binding and prevents impurities from being absorbed into the surface For topcoating of Mosaic floors Excellent resistance to...
Tikkurila Solid Laq, a 2 component product that can be used both for dust binding and as a top lacquer for other Solid floor products. It is well-suited to surfaces that are subject to moderate mechanical and chemical stress and can be used for both untreated concrete floors and those treated with epoxy or polyurethane paints and coatings....
Tikkurila Temafloor Fluat is crystalline, water soluble, silicon fluoride, surface impregnating agent for concrete floors. Suitable for dust binding and surface hardening of unfinished old and new concrete floors.Recommended for e.g. warehouses and multi-story garages Reacts with the calsium carbonate in the concrete surface Does not...
Water-based curing compound and clear sealer for Flexcrete Repair and Protection Systems. Used as a curing membrane (conforms to the requirements for water retention given in ASTM C309), as a sealer coat for concrete, and as a clear lacquer which can be applied to damp but surface-dry substrates to form a tough, glossy finish.BBA Approved,...
Prevent floors from dusting with our extensive range of floor sealers, available in one, two and three component products.
Seal concrete garage floors as well as industrial surfaces in areas such as chemical plant rooms, food processing and beverage areas, factory units, automotive and aviation areas, and many more, preventing cracks, pitting and other damage from releasing dust.
Our collection of floor sealer products includes sealers for interior and exterior masonry, wood, stonework and GRP, with features including low odour, greatly increased chemical resistance, and fast drying – ideal for returning areas back into service quickly, minimising downtime for businesses.