RSL Tyre Mark Remover, a specialised heavy duty cleaner designed to remove particularly stubborn rubber deposits such as tyre marks from floor surfaces. Safe to use on epoxy and polyurethane coatings and screeds, RSL Tyre Mark Remover is water rinsable and leaves no slippery residues.
RSL Tyre Mark Remover is a specialised heavy duty cleaner designed to remove particularly stubborn rubber deposits such as tyre marks from floor surfaces. Safe to use on epoxy and polyurethane coatings and screeds, RSL Tyre Mark Remover is water rinsable and leaves no slippery residues.
Supplied ready to use.
Manual
Sweep floor to remove debris. Apply product to the area to be cleaned with a spray, cloth or mop. Leave for a few minutes and wipe off. If mark does not lift immediately, apply a little more product and leave for 10 to 20 minutes. Clean floor area thoroughly with a 2% solution of R.S. Industrial Floor Cleaner.
Floor Cleaning Machines/Scrubber Driers
Sweep floor to remove debris. Apply product to the area to be cleaned with a hand held spray or back pack system. Leave for a few minutes. Attach red pads or stiff brushes to a combination scrubber/dryer machine. Charge with a 2% solution of R.S. Industrial Floor Cleaner. Make the first pass of the scrubber drier machine without using the vacuum, giving the product additional contact time with the floor. On the second pass, scrub floor and recover soiling as usual.
Estimated Coverage
100ml to 200ml of product should clear an area of approximately 1m2 . This is dependant on the level of soiling and more stubborn deposits may require more R.S. Tyre Mark Remover to completely remove them.
| Typical Physical Characteristics | |
|---|---|
| Appearance | Clear to Light Straw coloured liquid |
| pH (As a concentrate) | Typically 6—8 |
| Relative Density | Typically 1.02—1.03 g/cm3 |
| Solubility (In water) | Complete |
Shelf Life (unopened containers) : 12 Months
Protect against frost. Where product has been stored in cold temperatures, leave to reach ambient temperature prior to use. Handle in accordance with good industrial practise; no special precautions required with product alone. PPE should be worn in accordance with guidelines set out on the MSDS/Safety Data Sheet.
Contaminated product and/or rinse water should be disposed of in accordance with local regulations. For more information please refer to the Product MSDS.
R.S. Tyre Mark Remover should not cause any health and safety issues, when used in accordance with the recommended instructions. R.S. Tyre Mark Remover can cause eye damage and appropriate PPE should be worn during application. For more information please refer to the Product MSDS.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
RSL Tyre Mark Remover is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
RSL Industrial Floor Cleaner is a highly effective, versatile aqueous cleaner and degreaser.Highly effective, versatile aqueous cleaner and degreaser Powerful cleaning action Easily removes oils, grease and heavy soiling from most flooring surfaces Leaves no smears or residues upon rinsing May be used after RSL Tyre Mark Remover or RSL...
£33.74 (incl. VAT)
£28.11 (ex. VAT)
