Anti-Condensation Paints

Rawlins Paints stock a range of anti-condensation paints, all in a choice of finishes with long lasting solutions to any interior damp problems. Ideal for a wide range of domestic, commercial and industrial areas that may experience issues with condensation, including but not limited to:

• Rental properties
• Breweries
• Walls
• Ceilings
• Bathrooms
• Shower rooms
• Wet rooms
• Wash rooms
• Communal showers
• Changing rooms
• Kitchens
• Utility rooms

Mould vs Damp vs Condensation

Problems with damp, mould, and condensation can be expensive and worrying for project managers. Combating these problems needs high performance damp proof paints and anti-condensation paints with specific properties to combat the potential scenarios caused by fungal growth and mildew. For storage facilities, for example, finding damp and algae problems on walls, floors and ceilings may mean that the ‘problem’ has affected stock, too. Anti-condensation and related hygienic coatings are best seen as a precautionary and preventative business measure, and not always a problem-solving product. Food processing and packaging plants must deal with substantial amounts of steam in advance, before health and safety protocols are breached.

As damp and mould are common and recurring problems that affect commercial and domestic buildings, we’re often asked about the best products to use. You can either choose a primer to use underneath your own choice of paint, or you can buy a full system with a topcoat that can prevent further damp and mould problems.

Although these products are often referred to as umbrella problem-solving products for internal damp, condensation, or algae growth on walls and ceilings, differentiating and diagnosing the specific problem is important in finding the most suitable product.

Damp comes from the actual building structure lacking a protective barrier against moisture penetrating through substrates and surfaces. Rising damp is one example of problems stemming from damp proof barriers being breached and causing internal problems. Leaking roofs is another example of how damp can penetrate a property. Due to this, dealing with damp internally on walls and ceilings using a specific paint does not mean that the damp problem is resolved – as water and moisture’s point of entry is still available. Specific rising damp and roof repair products are also available at Rawlins Paints.

Condensation – sometimes incorrectly labelled as damp – is caused by lack of ventilation. Laundry facilities, restaurants and cafes, or contained areas where cleaning equipment that produces medium to high volumes of steam are particularly prone to condensation. In this case, if improved ventilation is not available, anti-condensation paint can prevent this moisture build up from causing stagnant smells, stains and surface discolouration. Over periods of time, anti-condensation can stop surface materials breaking down, corroding and eventually the underlying substrate can be attacked, where rust may occur, or businesses may need to close facilities to conduct maintenance and repair work.

Please remember that damp and condensation does not just affect surfaces and substrates, but staff overalls stored on-site, surplus and stored stock, along with personal health can be affected, too.

Product choice therefore is dictated by the size of the surface, the nature of the challenges of the environment, and whether structural repair work is required to compliment these products in treating damp or improving ventilation in a property.

Does Anti-Condensation Paint Actually Work?

Anti-condensation paints help protect surfaces from the effects of condensation. The cause of condensation - usually poor ventilation - still needs to be rectified.

Anti-Condensation and Anti-Mould Paint

What is the best paint to stop condensation?

For areas where lots of water or steam vapour forms, such as shower rooms, laundries and bathrooms, Rust-Oleum 5090 Anti-Condensation Coating works well. Rust-Oleum coating absorbs water and contains a fungicide to help prevent the growth of mould. It can be used on ceilings and walls as a one coat application but can also be applied in two or three coats for a specific textured finish – decorative and functional, the perfect combination. 

Tikkurila GrafoTherm is an anti-condensation coating for steel roofing sheets, steel structures and other metal surfaces, where condensation and dripping-water problems occur - an ideal paint to stop condensation on metal roofs.

Why Buy From Rawlins?

We Make Buying Specialist Paint Easy! There are 4,000+ industry-standard colours and shades available to select on the product page - match colours from other paint brands and manufacturers, older shades, corporate branding, and more.

Buy sample sachets to test colour schemes, and use our free colour match service to allow customers to send a 25mm x 25mm (minimum size) sample for colour matching.

Guaranteed and Approved - Our products have long guarantees and approvals such as from the National Residential Landlords Association (NRLA) and from industry approved systems that include Norsok, Highways, ISO 12944, Network Rail, MED.

Great Quality Paints - you won't need to reapply next year to sort problem surfaces such as mould, damp, and condensation on walls and ceilings.

Specialist Courier Services - we don't just throw it in a box and hope for the best; all orders are sealed and packed appropriately for transport and delivered with a paint-specialist courier.