Hygiene Coatings

Rawlins Paints' range of specialist hygiene paints for walls, floors and ceilings are all developed to include anti-bacterial properties. These hygiene coatings are formulated to be easy to clean, low odour and simple and fast to apply, something that is often important when it comes to timescales for maintenance jobs.

Depending on the stage of the project, we have products ideal for simple redecoration work, a quick upgrade of colour coating or a brand-new installation. Systems are applied in different ways and the level of hygiene needed dictates which product is best for each project. For any assistance or further advice on the products listed on this page, please contact our customer support service.

Hygienic paints aren’t singularly used in sensitive areas, like hospitals and care wards. Many workplaces require durable hygienic coatings for kitchen and food preparations areas, or wash-rooms and toilets. Hygiene control is a key element of caretakers and maintenance workers’ schedules, and having the correct paint system installed – from the primer to its subsequent topcoat – can be cost-effective and time-saving for rigorous cleaning schedules which would benefit from an abrasive resistant surface coating.

Please refer to product datasheets for the suitability of a product’s use on a surface, material or substrate, including:

• Tiles
• Plaster
• Brick
• Concrete
• Wood
• Ceramic tiles
• Plastic
• PVC
• Metallic surfaces
• Previously painted/emulsion surfaces

Correct installation of a hygienic paint system can:

• Protect surfaces and substrates against mould, algae and moss-growth
• Produce an aesthetically sound finish
• Cohere to specific colour scheme requirements
• Offer chemical resistance
• Deliver a germ-free and anti-bacterial area
• Improve cleaning schedules
• Offer anti-damp and anti-condensation qualities

Hygiene Primer Coatings

Hygiene topcoats and paints need specialist primer paints to work in tandem with their anti-bacterial properties. Anti-mould hygiene primer 8399 is often requested as a hygiene primer. Made by Rust-Oleum, 8399 Hygienic Primer is specifically formulated to use under Rust-Oleum 8300 Hygienic Topcoat. It protects well against mild chemical exposure, spillages, regular deep cleaning using chemicals, moisture and humidity. It can be used on walls and ceilings making it a good all-round hygiene primer.

Hygienic Wall and Ceiling Paints

Glixtone Fungishield

This anti-mould & black spot paint is approved by the National Residential Landlords Association (NRLA). It is ideal for use by Landlords who can face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants.

Suitable for walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms, living areas. Glixtone Fungi-Shield will not stop condensation or damp, however, when applied it is impossible for mould spores to survive on its surface as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. It offers a long lasting solution to what can be a never ending battle.

Sikagard Hygiene Range

Sika Reemat Lite is a glass fibre reinforcement mat for use primarily in conjunction with the Sikagard Hygiene range of systems for walls and ceilings to provide increased system strength, crack bridging and longevity. The randomly orientated fibres within the mat give maximum multidirectional tensile strength to the membranes whilst allowing them to remain highly elastomeric. It may be used for total or partial reinforcement and can be easily moulded around protrusions, joints, corners and other surface details.

For environments in need of extra defence against germs and bacteria, Sikagard 403 W is an excellent choice. This waterborne modified acrylic resin coating is very resistant to lots of heavy cleaning, is long lasting and has a seamless finish. Ideal for use in hospitals, surgical rooms and restaurant kitchens.

Replacing the now discontinued Sikagard 205 W (Sterisheen), Sikagard 405 W is a is a single component, waterborne acrylic resin based coating containing an organic in film preservative with a mid-sheen finish. Used on concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Providing good resistance to repeated cleaning regimes which use mild detergents and cleaning solutions, it is a tough and highly durable coating for pharmaceutical, medical engineering, food and beverage industry, hospitals, healthcare facilities, kitchens and prisons and leisure facilities.

Sikagard 406 W replaces the now discontinued Sikagard 206 W (Sterimatt), and is the matt finish alternative to Sikagard 405 W.

Please check Sikagard product datasheets for all recommended substrates and surfaces for which these hygienic coatings can be used on.