Follow us on:

Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Suitable For Use On

Suitable For Use On

Colour Family

Colour Family

Size

Size

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Marine Paint

There are 63 products.

Showing 1-12 of 63 item(s)

Active filters

  • Brand: International
  • Brand: Jotun
  • Brand: PPG

International Interzone 954

International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.A high film build, high...

Price £137.77 (ex. VAT)

£165.32 (incl. VAT)

£137.77 (ex. VAT)

In Stock and Available for Delivery

PPG SigmaCover 280

SigmaCover 280, a universal epoxy anticorrosive primer suitable for ballast tanks, decks, topside, superstructure, hull and cargo oil tanks. SigmaCover 280 is used in protective coating systems for steel and non-ferrous metals, curing at temperatures down to 5°C (41°F), and can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy...

Price £36.24 (ex. VAT)

£43.49 (incl. VAT)

£36.24 (ex. VAT)

In Stock and Available for Delivery

Jotun Vinyguard Silvergrey 88

Jotun Vinyguard Silvergrey 88 is a one component physically drying vinyl coating that is fast drying and can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. Recommended for topside, deck and superstructure or as a tie coat for anti-fouling systems in the marine...

Price £34.20 (ex. VAT)

£41.04 (incl. VAT)

£34.20 (ex. VAT)

In Stock and Available for Delivery

International Interprime 198

A quick drying, one pack alkyd primer, Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.For the maintenance of above water areas Approved for the carriage of grain when used as part of an approved scheme For use at Maintenance & Repair or On Board Maintenance...

Price £63.85 (ex. VAT)

£76.62 (incl. VAT)

£63.85 (ex. VAT)

In Stock and Available for Delivery

Jotun Alkydprimer

Jotun Alkydprimer is a one component, single pack oxidatively drying alkyd coating that can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminium and wooden substrates, this alkyd primer is ideal for a wide range of industrial structures or for touch up areas in the marine industry.

Price £32.77 (ex. VAT)

£39.32 (incl. VAT)

£32.77 (ex. VAT)

In Stock and Available for Delivery

PPG SigmaCover 350

SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...

Price £53.76 (ex. VAT)

£64.51 (incl. VAT)

£53.76 (ex. VAT)

In Stock and Available for Delivery

Jotun Jota Armour

3 component, abrasion resistant, polyamine cured epoxy anti-skid coating for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Price £145.65 (ex. VAT)

£174.78 (incl. VAT)

£145.65 (ex. VAT)

In Stock and Available for Delivery

Jotun SeaForce 90

Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined...

Price £157.80 (ex. VAT)

£189.36 (incl. VAT)

£157.80 (ex. VAT)

In Stock and Available for Delivery

International Interzone 954 (Rapid Cure)

International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...

Price £137.77 (ex. VAT)

£165.32 (incl. VAT)

£137.77 (ex. VAT)

In Stock and Available for Delivery

PPG SigmaShield 880

PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....

Price £57.14 (ex. VAT)

£68.57 (incl. VAT)

£57.14 (ex. VAT)

In Stock and Available for Delivery

Jotun Mare Nostrum SP

Jotun Mare Nostrum SP is a self-polishing antifouling based on a unique binder combination system.Totally active surface Clean hull for the whole season Continuously renews True colour once immersed Excellent fouling protection For fresh water

Price £60.52 (ex. VAT)

£72.62 (incl. VAT)

£60.52 (ex. VAT)

In Stock and Available for Delivery

PPG Sigmarine 48

PPG Sigmarine 48 is a general purpose gloss paint based on an alkyd-modified resin that is particularly suitable as a finish for boottop, topside, deck and deck equipment.Quick-drying Water and weather resistant coating Can be applied over most intact alkyd paints Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050...

Price £45.30 (ex. VAT)

£54.36 (incl. VAT)

£45.30 (ex. VAT)

In Stock and Available for Delivery

Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Suitable For Use On

Suitable For Use On

Colour Family

Colour Family

Size

Size

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Need Help?

Painting your boat, whether it’s personal or commercial, fresh or sea water vessel, doesn’t have to be complicated, and it doesn’t have to be expensive. Rawlins Paints stock a wide range of marine paint products, including deck paint, anti-fouling paint, bilge paint, marine gloss, boot-topping, ice breaker low friction coatings and more.

Our ethos is to offer lesser known brands that do not compromise on a quality finish, meaning we can offer products that work at a fraction of the cost of market leaders.

Marine Gloss Paints

Teamac boat paint comes in several types, including Teamac Marine Gloss and Teamac Antifoul paint. Teamac’s marine gloss is a superior marine coating with a high gloss finish, suitable for lots of different marine areas above the water line, including masts, bridge fronts and deck work. It’s available in assorted colours and should be applied by roller or brush.

If you’re looking for a yacht varnish, then Teamac Teamalak yacht varnish is a good choice. It can be used on all wood surfaces where you need a high gloss, UV resistant finish. This could include furniture on deck or woodwork on the outside of the yacht.

Jotun Spontan Varnish is an easy to use, one component coating with a gloss finish, making it an ideal marine varnish choice. As with many of our marine coatings (but not all, so make sure you check!), Spontan can be applied as a spray or with a brush.

Marine Topcoats

Teamac High Performance Finish is a two-pack top coat that will increase the durability of wood, metal and GRP surfaces on your vessel. It’s specifically designed as a marine topcoat and consists of a basecoat and hardener available in lots of assorted colours.

For a combined primer and topcoat for use on marine metal, select Teamac Duracote Red Oxide paint. It’s a general-purpose coating for metal and can be used inside and outside, so it’s perfect for lots of different marine uses.

Deck Coats

It’s important to find the right anti slip deck coating to ensure safety on deck. Teamac Suregrip Deck Paint is a specifically formulated deck coating for sea faring vessels. Already mixed and aggregated, Suregrip deck paint gives a rough anti-slip finish, making it safe for crew members to walk on deck even in rough seas. Available in lots of distinct colours, Suregrip can only be applied with a brush and is suitable for use on metal, wood, concrete and GRP.

Alternatively, Teamac Deck Paint Smooth is a protective coating designed to increase the durability and lifespan of wood, metal and GRP decks. Before you apply this deck paint, you need to make sure the surfaces are dry, clean and free from any contaminants, and if you are applying directly onto GRP you’ll need to abrade the surface before spraying, brushing or rolling the deck paint.

Boot-Topping Paints

Boot-topping paint products are used to paint the area of a hull between the load line and the waterline of a vessel. It’s specifically formulated to provide antifouling qualities in that it’s less receptive to marine growth. It’s also polishable so it’s easy to clean. Teamac Boot-topping paint is a very hard-wearing finish and is water and weather resistant. It can be used directly onto GRP surfaces, but others will have to be primed and prepared properly with a suitable primer product.