Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 10 products.
Rust-Oleum Hard Hat 2500 Transparent Protection is a non-yellowing transparent protecting coating that can be applied over various Rust-Oleum products, old fading coatings or directly onto many surfaces to provide increased durability, exterior performance, gloss level and cleanability.Non-yellowing (UV resistant) Quick drying (10-15...
£14.84 (incl. VAT)
£12.37 (ex. VAT)
Rust-Oleum Hard Hat 2990 Stain Blocker is a matt white high-pigmented coating for the permanent isolation of problem stains from nicotine, soot, tar, rust, the effects of moisture, graffiti, and numerous other colourings. Matt white finish, best possible opacity (non-yellowing) For application on concrete, plaster, particle board existing...
£9.11 (incl. VAT)
£7.59 (ex. VAT)
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like:Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
£33.05 (incl. VAT)
£27.54 (ex. VAT)
Rust-Oleum 4900 Polycoat 2K is a clear, water-based, 2-component polyurethane topcoat for use on wood, concrete and pre-painted surfaces, also serves as an anti-graffiti coating. Very abrasion resistant, available in a matt or gloss finish, does not yellow, can be used internally and externally, resists boiling water, alcohol, coffee, red...
£35.40 (incl. VAT)
£29.50 (ex. VAT)
Tikkurila Temachlor 40 is a one-component high-build chlorinated rubber-based paint that can be applied at sub-zero temperatures, as a finishing coat for chlorinated rubber systemsHuge colour selection from RAL, BS & NCS Ideal steel surfaces and structures Good film-building properties Suitable for surfaces exposed to marine or...
£384.47 (incl. VAT)
£320.39 (ex. VAT)
Tikkurila Temadur Clear provides extra protection and colour and gloss improvement, used for topcoating polyurethane paint systems making the paint film durable, non-chalking and easy to clean.Two-component, glossy polyurethane varnish, hardener aliphatic isocyanate MED (Marine Equipment Directive) certificate no EUFI29-19002225- MED and...
£145.99 (incl. VAT)
£121.66 (ex. VAT)
Tikkurila Temadur AN Clear, a two component, full matt polyurethane varnish, hardener aliphatic isocyanate with excellent weathering and abrasion resistance.Applies by conventional and air-assisted airless spraying Use a power mixer for mixing base and hardener For industrial use only.More Information Delivery Info
£199.02 (incl. VAT)
£165.85 (ex. VAT)
Tikkurila Fontedur Clear Plus, a water-borne, two-component polyurethane lacquer with outstanding gloss and colour protection properties.Excellent UV-resistance User and environmentally friendly Very good spraying properties Slightly milky surface as wet eases to control the quality of the surface Resistant against moderate mechanical...
£863.83 (incl. VAT)
£719.86 (ex. VAT)
400ml Aerosols custom filled with Rust-Oleum CombiColor Multi-Surface in a choice of 4,400+ colours - a solvent-based, adhesive primer and topcoat in one.For internal/external use - Quick drying Based on an alkyd binder it provides good adhesion and is lead and chromate free Direct application to many surfaces, including wood, metal*,...
£84.30 (incl. VAT)
£70.25 (ex. VAT)
A solvent-based, adhesive primer and topcoat in one with 4,400 colours for direct application to many surfaces, including wood, metal*, uPVC, mdf, masonry, tiles, most plastics, old concrete and more.For Professional use For internal/external use Quick drying Based on an alkyd binder Provides good adhesion to many types of substrates...
£16.96 (incl. VAT)
£14.13 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Significant leaps forward in product development have led to the availability of many excellent multi surface paints (MSP) from high performance brands, including Blackfriar Professional, Coo-Var, Rust-Oleum, and Zinsser. Many of these coatings can be used on rejuvenating uPVC glass, ceramic tiles, wood, metals, brick, vinyl, rendering, asbestos, slate, cladding, hardboard, masonry, GRP, plastic, melamine, and other previously varnished, enamel or gloss painted surfaces. Surfaces and appliances that these multi-surface paints are designed for, include walls and ceilings, doors, trim, window sills, fascia, soffits, hand and stair railings, cupboards, units and drawers, and other previously decorated surfaces.
Rawlins Paints stock a wide range of all surface paint products that provide high quality finishes for many different surfaces in workplace or factory workplaces, as well as for smaller touch-up maintenance projects. Some multi surface paints can be applied as an all-in-one all-purpose paint without the need for a separate primer. Or, you can also choose to use a multi surface primer that can be covered with any paint of your choice. If you have difficult surfaces, such as plastic, UPVC or tiles, then multi surface paint could be the way to ensure a good finish without compromising on quality.
If you are looking for paint and coatings with special features for a particular project, such as Fire Resistant Paints, Anti Mould Paints and Anti Condensation Paints please click here:
Rawlins Paints offer an extensive range of paints and coatings with specialist features, some of which can be used across multiple substrates.
We offer a fantastic range of Fire Protection products, Anti-Mould paints and Anti-Condensation paints - please see the links below which will take you directly to the relevant section of our website:
You can also refer to the Rawlins Paints Blog which includes dozens of informative 'How To' Guides and useful articles to help you to choose and apply the correct coating for your needs. This is regularly updated with tips and advice to help your project look and perform the best it possibly can with minimum fuss.
Rust-Oleum CombiColor Multi-Surface is a quick-to-dry solvent-based MSP for use inside and out. It’s a topcoat and primer in one and sticks well to different surfaces, including metal, MDF, tiles, most plastics, old concrete and glass.
CombiColor MSP is an extremely popular high-quality product available in 4,100+ colours from RAL and BS - including favourites such as Anthracite Grey RAL 7016, and Chartwell Green.
Zinsser AllCoat paint products include Zinsser AllCoat Exterior Gloss, Zinsser Bulls Eye 1-2-3 and Zinsser Bulls Eye 1-2-3 Plus. Zinsser All Coat Exterior is an MSP paint that is guaranteed to offer up to eight years protection on exterior surfaces. Developed for decorating metal, masonry, plastic, timber, cladding and other exterior paint surfaces, Zinsser AllCoat Exterior paint forms a water-shedding coating. As it contains a biocide, the dry coating is also protected against fungal degradation and mould, making it an excellent choice for projects within challenging environments.
Zinsser AllCoat Solvent-based multi surface paint is a four-in-one product, which works as a stain blocker, primer, sealer and finish and is a great any surface paint. Billed as Zinsser’s ultimate interior refurbishment paint, it’s excellent for any commercial or domestic interiors and it’s very quick to use so particularly useful if you are working on jobs with tight turnarounds.
Zinsser AllCoat Water-Based is another multi-surface paint with multiple uses on interior surfaces. It’s also a sealer, primer and finish and is great for large expanses of surfaces in commercial environments, such as car showrooms and supermarkets due to its high covering power, quick dying times and ability to adhere to so many different surfaces.
Coo-Var Prime-All is a solvent-based multi-surface sealer and primer to use on exterior and interior surfaces. It’s designed specifically to give good, long lasting coverage of any staining on the surface and can be applied to plaster, most plastics, wood and metal. However, if you do want to use it on plastic, it’s worth testing a small area first to be completely sure it will give you the finish you want.
Our aim is always to make buying specialist paint easy, and our selection here aims to help you find the ideal paint for your project quickly and easily.
Our technical team are always happy to help if you require assistance with any aspect of your project. Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected].
