Keim Lime Remover is a pre-treatment and cleaning agent based on silicic acid which, when applied, reacts to form harmless compounds.
Top Features & Benefits
- No solvents added.
- Available in 5L and 20L containers.
Preparation & Application
Keim Lime Remover 1:3 clean cold water
In order to accelerate drying and carbonation, Keim Lime Remover should not be applied to the render before the surface has dried, at which point it should be brushed on appropriately diluted from bottom to top to saturate the surface. The reaction starts immediately and can be recognised by slight foaming. Treated surfaces should then be washed down with water. New render on interior walls does not need to be washed down. Pure lime renders of mortar groups PIa and PIb which harden only slowly by absorbing carbon dioxide may form new sinter layers and require a second application. Keim Lime Remover may also be used as a cleaning agent for dirty areas of existing render.
Keim Lime Remover may be applied once the render surface has dried, after a minimum period of one day. Lime renders (PIa, PIb) must be allowed to set for at least 4 weeks before a second application can be applied. A colour coat may be applied once a further drying period has elapsed.
- For Use By
- General Use
- Coloured Liquid
- Base Type
- Exterior / Interior Use
- Exterior & Interior Use
Be the first to ask a question about this product!