Envirograf Fire Protection Coating for PVC Electrical Cables
  • Envirograf Fire Protection Coating for PVC Electrical Cables

Envirograf Fire Protection Coating for PVC Electrical Cables

Product 80 - EP/C

Envirograf Fire Protection Coating for PVC Electrical Cables produces a microporous intumescent foam layer when attacked by fire to help prolong the functions of cables with plastic casings, and prohibits PVC fumes during fires. The coating has no harmful effects on existing working cables and offers some flexibility without cracking.

Size
£22.64
VAT excluded

£27.17 Tax incl.
Quantity

Description

Envirograf Fire Protection Coating for PVC Electrical Cables produces a microporous intumescent foam layer when attacked by fire to help prolong the functions of cables with plastic casings, and prohibits PVC fumes during fires. The coating has no harmful effects on existing working cables and offers some flexibility without cracking.

For more information about this product's details, Test Data and Test Results included in manufacturer attachments, please contact our Technical Support team on 0113 245 5450, or send us a message here.

Advantages:

  • Water based
  • Odourless
  • White intumescent fire retardant coating
  • No harmful effect on working cables
  • Helps to inhibit PVC fumes in the event of a fire
  • Allows some flexibility without cracking
  • Develops a microporous intumescent foam layer when exposed to fire which protects the cable with its low caloric conductivity

Application:

  • Each litre covers approximately 1m² of bunched cables or approximately 20m of 25mm diameter cable.
  • Can be applied using brush or spray
  • Up to 10% water dilution allowed when spraying but ensure correct loadings are applied to area to give maximum fire protection - please contact the technical department for further information
  • Please observe basic rules for working with paints
  • Drying time: Dries in approximately 1 hour. Thoroughly dry after 24-48 hours depending on the temperature of the surroundings
  • Storage: Can be stored for up to 6 months at room temperature protected from frost
  • Ensure surface is dry and grease free. Old peeling paint should be removed completely before application
  • Stir well before use
  • Apply at temperatures of over 10ºC and a relative humidity of under 18%.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 80 - EP/C
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send