Tor Elastadeck Edge Detail Basecoat

Reference:

Manufacturer:

Tor Elastadeck Edge Detail Basecoat is a two pack moisture activated polyurethane coating with zero solvent odour, providing a long term waterproofing membrane for protection of balconies. Fibre filled base coat as part of a multi-layer Elastadeck System providing a hardwearing, resin flooring system, designed to waterproof and provide slip resistance to balconies and walkways.

Bulk Buy

£129.12 tax excl.

£154.94   tax incl.

Product Description

Tor Elastadeck Edge Detail Basecoat is a two pack moisture activated polyurethane coating with zero solvent odour, providing a long term waterproofing membrane for protection of balconies. Fibre filled base coat as part of a multi-layer system.

Surface Preparation

Ensure all surfaces are clean, sound, dry and free from oil, grease, grime and other surface contaminants. When required, ensure the primer is adequately cured (see data sheet Tor Elastaseal Z Binder Sealer (RC144)) before applying the Basecoat.

Application

Apply Tor Elastadeck Edge Detail Basecoat with a short/medium pile fleecy roller. Cast Tor White Aluminium Oxide Grit (30 mesh) into the wet coating at approximately 1kg/m² to increase surface wear, protection and slip resistance.

Tordeck Edge Detail Basecoat Limitations

  • This product should only be applied by Tor Coatings Approved Contractors (further details on request).
  • Do not apply if rain is imminent.
  • Overcoating must be carried out within the timescale overleaf otherwise further preparation will be necessary.
  • Protect surface from chair legs, heavy standing objects etc with suitable mats.
  • Not to be used in heavily trafficked areas.

Download the Elastadeck System Data Sheet and/or Elastadeck PB System Data Sheet for more details

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)1.1m² per litre
Touch Dry90mins
ApplicationRoller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable