Mathys Pegaprim Isofix
  • Mathys Pegaprim Isofix

Mathys Pegaprim Isofix

3290.1

Mathys Pegaprim Isofix is a super adhesion and stain block primer for interior and exterior use. Produces good adhesion on metals and smooth hard surfaces.

  • Very fast drying
  • Closed, good adhering paint film
  • Masks odours
  • Recoatable with most water and solvent borne decorative paints
  • Can be applied at freezing temperatures

Colour
Size
Finish
£19.00
VAT excluded

£22.80 Tax incl.
Quantity

Description

Mathys Pegaprim Isofix

Mathys Pegaprim Isofix is the ultimate adhesion primer. It is 100% white pigmented shellac, Pegaprim Isofix blocks the worst stains, seals in the toughest odours and bonds tightly to glossy and dense surfaces. Mathys Pegaprim Isofix seals in knots and sap streaks, grease stains, fire odour, and seals new wood. It’s great as a general primer and as a spot primer. No other primer performs as effectively or dries and cures as quickly as Pegaprim Isofix.

Features & Benefits

  • Very fast drying
  • Closed, good adhering paint film
  • Masks odours
  • Recoatable with most water and solvent borne decorative paints
  • Can be applied at freezing temperatures

Premier Stain Killer

  • Water stains
  • Graffiti
  • Knots
  • Severe Smoke and Fire Damage
  • Rust
  • Food/Beverage
  • Soot
  • Interior Cedar/Redwood bleed

Best Odour Sealer

  • Fire Damage
  • Musty mould and mildew
  • Pet odours
  • Moth balls
  • Fireplace odours
  • Nicotine

Best Spot Primer

  • Filler repairs
  • Knots
  • Bare wood
  • Greasy, oily areas
  • Make-up
  • Ink, crayon stains

Best Over/Under Glossy Paints

  • Kitchen cabinets Trim & doors
  • Shelving
  • Panelling
  • Bare wood
  • Tile
  • Varnished trim
  • Metal
  • Formica®

Technical Data

  • Density: ± 1,2
  • Gloss Level: Satin
  • Gloss level at 60º: Satin: ± 10%
  • Solids content in volume: ± 30 %
  • Solids Content in weight: ± 54 %

Drying Times At 20°C/RH 50%

  • Touch dry: 15 minutes
  • Dry to recoat: 45 minutes
  • Fully cured: 1 day

Theoretical Consumption

± 10 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

The substrate should be clean, dry and stable. If necessary, degrease. Contamination has to be removed as thoroughly as possible. Strongly solvent borne topcoats must be tested for their tolerance first (e.g. polyurethane, epoxy).

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

> -1°C, < 80% R.H.

Application Methods

  • Roller: Apply undiluted.
  • Airless Spray: Nozzle: 0,015 inch / Pressure: 150 - 200 bar
  • Air-Atomised Spray: Dilute with ± 2% volume denaturised alcohol

Remarks

In case of too fast evaporation or spraying, add ± 2% volume denaturised alcohol.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
3290.1

Data sheet

Interior/Exterior Use
Interior and Exterior
Application
Roller, Spray
Dry to Recoat (at 20°C)
45 minutes
Fully Cured (at 20°C)
1 days
Coverage
10m² per litre
Min. Application Temperature
-1°C
Density
± 1,2
Solids by Volume
± 30 %
VOC
480 g/l
Shelf Life (from date of manufacture)
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
15 Mins
Recommended Dry Film Thickness
30 µm
Recommended Wet Film Thickness
100 µm
UN Number
UN1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send