International Interseal 670HS (Winter Grade) is supplied with a winter grade curing agent to enable more rapid cure at lower temperatures. The product is still a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel and a wide range of...
1801 Anti-Corrosive Primer/Finish
A quick drying, anti-corrosive, one coat primer and finish formulated for direct application to prepared steel and cast iron.
A quick drying, anti-corrosive, one coat primer and finish formulated for direct application to prepared steel and cast iron. Offers anti-corrosive protection to structural steelwork whilst providing a cosmetically pleasing coloured semi-gloss finish. Quick drying and high build characteristics reduce labour and application time on site or in-shop.
- Tough and weather resistant
- For interior and exterior use
- Quick drying, high build formula
- Can be applied to bare steel – no primer required
- Corrosion inhibiting
- Wide colour range
- Typical Coverage (per coat)
- 6m² per litre
- Touch Dry
- 20 mins
- Brush, Roller, Spray
Be the first to ask a question about this product!
Jotun Jotamastic 90 White B16 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, abrasion resistant, high solids and high build. It has been specifically developed to meet the requirements of UK Highway Agency Item 116 for use on bridges and highway infrastructure.
Coo-Var Hammercote Smooth Aerosol is a fast drying coating which gives a hard, durable, smooth finish direct to metal objects in a handy 400ml aerosol. ADVANTAGES Very fast drying Full hardness after several days Apply direct to metal or primer Durable Gloss finish Rust resistant Heat resistant up to 150°C Interior/Exterior use
Jotun Norpol Accelerator 9826 (formerly known as Jotun Accelerator DMA10) is a specially developed additive for Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information.
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Sika Poxitar F is an epoxy-anthracene oil-combination heavy duty coating for steel and concrete. Sika Poxitar F is tough hard, heavy duty, abrasion and impact resistant and has excellent resistance to water and chemicals.
A two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.
Cromadex 690 Two Pack Polyurethane Gloss Primer Finish is a two pack gloss primer finish; it is a high build finish making it suitable for blasted steel. The product contains zinc phosphate giving added corrosion resistance for greater durability.Cromadex 690 is available in full Cromadex range of colours, including BS, RAL, and special matches all in a...
Rust-Oleum CombiColor Multi-Surface Paint is a solvent-based, adhesive primer and topcoat in one based on Alkyd binder. ADVANTAGES For internal/external use Quick drying Apply to many surfaces 19 colours in gloss, matt and satin finishes Part of the CombiColor range
Jotun Peroxide 11 is a specially developed additive for Jotun Chemflake Special and Jotun Chemflake CV products - refer to each product data sheet for further information. Alternatively speak to our Technical Department at Rawlins Paints for help and advice prior to purchase.
Cromadex 290 One Pack Gloss Primer Finish is a one pack gloss primer finish suitable for both interior and exterior use. The product contains zinc phosphate giving added corrosion resistance for greater durability. Cromadex 290 is available in full Cromadex range of colours, including BS, RAL, and special matches all in a lead free finish.
A winter grade epoxy coating for application at temperatures down to 0°C. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application.