A two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.
Rust-Oleum CombiColor Hammertone
A hammered finish maintenance paint for metal with superior metal protection, even direct to rust. Rust-Oleum CombiColor Hammertone is a primer and topcoat in one, ideal for various little projects. For a satin, matt or gloss finish, please check out Rust-Oleum CombiColor paint.
Rust-Oleum CombiColor Hammertone can be applied directly on bare, manually derusted or with CombiPrimer Anti-Corrosion 3369/3380 primed steel. Rust-Oleum CombiColor Hammertone produces a traditional 'hammered' effect and is available in a brush/roller or aerosol version. Rust-Oleum CombiColor Hammertone should be used in light industrial exposures, normal humidity and interior applications.
Features & Benefits
- Primer and topcoat in one
- For application onto rust, bare metal and wood
- Hammered finish - high hiding power
- Usable down to 5°C
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller, Spray
- 8m² per litre / 2-3m² per aerosol
- Touch Dry
- 1.5 hours (brush) / 4 hours (aerosol)
|Pauline on 28/03/2018|| |
Can I use this on lincrusta indoor wallpaper in gold
No. We don't have anything for this application, apologies.
|Allan Reynolds on 18/05/2015|| |
Could I use Rust-Oleum CombiColor Hammertone successfully on my old chipped aluminium garden chairs and table? If not, what product should I use to get a dark brown hammered finish?
Rust-Oleum CombiColor Hammertone will work perfectly on your garden chairs and table. Be sure to prime any bare areas of aluminium with Rust-Oleum 3302 CombiPrimer Adhesion first.
Jotun Jotamastic 80 WG (Wintergrade) is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for application at lower temperatures to facilitate faster curing times on areas where optimum surface preparation is not possible or desired.
A highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all steel and concrete industrial markets Top Features Excellent chemical resistance Surface tolerant characteristics Self-priming VOC compliant to current AIM regulations
An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...
A ready-mixed maintenance paint for metal and other surfaces which adheres to the surface to which it is applied to form an impervious film which can withstand adverse climatic conditions.
An epoxy lining for “dry” natural gas transmission pipelines. It is designed to increase flow efficiency of natural gas in pipelines. It fully meets criteria of API RP 5L2 for gas transmission pipelines. Top Features Improves flow efficiency in gas pipes Excellent flow and leveling Single-coat application Hard, smooth, glossy finish
International Interzone 954 is a two component, low VOC, high solids, modified epoxy barrier coat designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.
For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Top Features Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces. Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity. High zinc...
This product is now only available with a minimum order of 800 litres; for smaller orders, we can recommend Jotun Jotacote Universal N10 as a great alternative. Jotun Jotacote Universal is a two component amine cured pure epoxy coating that is a fast drying, abrasion resistant, high solids and high build. Designed as an universal, all round,...
A water-resistant epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. Top Features Protects I high temperature demineralized water immersion...
A surface tolerant from Jotun that is a high build epoxy coating suitable for environments with very high corrosivity, such as areas in the splash or tidal zones. Jotun Marathon 500 is a two component polyamine cured epoxy coating. It's a surface tolerant, high solids, high build product that will continue to cure even when immersed in water.
Jotun Jotamastic 87 GF WG is a Wintergrade version of Jotamastic 87 GF to aid application at lower temperatures and provide faster curing times. Jotun Jotamastic 87 GF WG is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids, high build product. Reinforced with glass flakes for improved abrasion and scratch...
A single package silicone finish and high-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C). Top Features Resistant to severe thermal shock Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
Confirming to BS 3416 and BS 6949, Type 1 Class A, this solar reflective bitumen coating is perfect for steel, non-ferrous metals, concrete, brick and asphalt, where a tough waterproof coating is required on surfaces. Advantages Hard-wearing gloss finish Repels water fast-drying High build coating
Carbomastic 15 LT is a high build coating with excellent adhesion to rusted steel and most aged coatings. Top Features Surface tolerant Recommended for painting over rusted steel Penetrates through rust to steel substrate Excellent maintenance primer for piping and offshore structures, etc.