A high performance primer with very good anti-corrosive properties for use on interior and exterior iron, steel and aluminium. Stronger than most basic DIY primers and is ideal in coastal areas.
1806 Adhesion Primer
A modified epoxy adhesion and stabilising primer, specifically formulated for adhesion to stainless steel, carbon steel, galvanising, aluminium, copper and brass.
A modified epoxy adhesion and stabilising primer, specifically formulated for adhesion to stainless steel, carbon steel, galvanising, aluminium, copper and brass. Can be tinted to a wide range of colours to aid the coverage of the topcoat colour, it functions as an adhesion bond coat and anticorrosive primer/sealer for metal substrates, stabilising the substrate to receive compatible high performance topcoats and imparting hydrophobic properties.
• Adhesion, stabilising and anticorrosive primer.
• Adheres to a wide range of bare metals.
• Cures down to 0°C
• Tolerant of slight surface moisture during application
• Easy application
• One coat is usually sufficient
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.
An all-purpose immersion-grade epoxy that can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Top Features Low temperature cure (20°F) Excellent corrosion protection Excellent application characteristics Fast recoat times
Nu-Steel SP Etch Primer is a single pack primer giving excellent adhesion to aluminium and other metal prior to subsequent paint systems. Advantages Available in Grey and Red Oxide. Excellent adhesion to metals. 12m²/Litre typical coverage. 12-month shelf life.
International Interprime 539 is a single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate. Intended for use as a pretreatment primer designed to promote adhesion and seal the surface of non-ferrous metals such as aluminium, copper, brass, cadmium, zinc and nickel.
Jotun Penguard Express B11 can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Suitable for properly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.
Cromadex 395 Anti-Corrosive Primer is an anti-corrosive primer containing zinc phosphate giving added corrosion resistance for greater durability. It is higher in solids giving superb opacity and coverage. The product has superb flow and levelling giving excellent topcoat appearance and can be used over sound existing paintwork, making it...
Jotun Penguard Express ZP is a two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric...
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
Tor Zinc Rich Brushing Primer, a protective primer for steel prior to overcoating, with a first-class finish for galvanised touch-up. High zinc content steel primer Metallic zinc dust in a modified alkyd medium and thinned with aromatic hydrocarbon solvents Applies by brush or roller Good coverage, with up to 10 square metres per litre...
This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Top Features Excellent immersion performance in water Suitable as a rust...
International Intergard 276 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
A fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. Top Features Rapid cure and fast-drying VOC compliant for most areas Good for filling properties on rough and pitted steel
Carboline Polyclad 777 Slow-Set is a solvent-free aromatic polyurethane, ASTM D16 Type V. A high performance 100% solids structural polyurethane coating designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. This product is available as POA. Click here to email us for more information. Top Features...
International Interlac 497 is a one pack alkyd undercoat for use on internal and external areas above water on marine vessels. It is for use at Newbuilding, Maintenance & Repair or On Board Maintenance.