"

SikaCor Elastomastic TF

SikaCor Elastomastic TF View larger
Typical Coverage (per coat)0.7-0.8kg / m² / mm
Touch Dry12 Hours
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

SikaCor Elastomastic TF is a reaction curing 2-pack epoxy-polyurethane resin for production of tough elastic coating systems on steel and concrete. SikaCor Elastomastic TF is used for adjustment differences to avoid standing water body and high performance, wear-resistant thin layers.

Read Full Description

More details

£297.26 + VAT

SikaCor Elastomastic TF is a reaction curing 2-pack epoxy-polyurethane resin for production of tough elastic coating systems on steel and concrete. SikaCor Elastomastic TF is used for adjustment differences to avoid standing water body and high performance, wear-resistant thin layers, e.g. for steel bridge decks, inspection sidewalks, pavement and bicycle tracks, traffic areas, track plates, that come in contact with ballast, trough bridges, track plates without gravel layers and guard rails.

Features & Benefits

  • High performance corrosion protection system
  • Mechanical, tough elastic- and impact resistant
  • Extremely good adhesion on steel and concrete substrates

Approvals & Standards

  • SikaCor Elastomastic TF is approved and certified according to the German regulation TL/TP-KOR Stahlbauten, page 84 appendix for riveted and welded steel bridges with and without ballast.
  • Approved according to ZTV-ING, part 7, section 5 (additional technical contract conditions and guidelines and production of reaction resin based thin layers on steel.
  • For use on concrete bridges with ballast an approval of the TU München is available.
  • For the use as an anti-slip-finish, there is the test report P 7460 available.

System Structure

1 x Primer coat (SikaCor HM Primer, SikaCor 277, Sikafloor 156):
1-2 x SikaCor Elastomastic TF 1:1 + Sika Quartz Sand 0.4 - 0.7mm Blinded in excess with Sika Quartz Sand 0.7 - 1.2mm, layer thickness per coating 3 - 6mm
If necessary, seal with 1 x Sikafloor 359 N

Test report slip resistance and extrusion R12/V8 resp. R13/V10 is available. Film thickness up to 6mm SikaCor Elastomastic TF can be achieved in only one step. When applying 2 layer systems the 1st layer has to be blinded with Sika Quartz Sand 0.4 - 0.7mm. Before applying the 2nd layer the non-adherent bonded Sika Quartz Sand has to be brushed off. For slope surfaces, 0.5 - 1.5% by weight Sika Extender T (related to ready mixed material) must be added to prevent sagging; the dosage depends on the ambient and material temperature.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

SikaCor Elastomastic TF TDS

Download

SikaCor Elastomastic TF MSDS Part A

Download

SikaCor Elastomastic TF MSDS Part B

Download