"

Sikafloor Resiplot

Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes.

Read Full Description

More details

£981.67 + VAT

Sikafloor Resiplot is a patented system for treating internal cementitious floors where conventional surface preparation is not viable. The system comprises of a mechanical anchored epoxy/glass-fibre mesh layer which provides a sound base for subsequent layers of synthetic resins or bonded tiled, timber finishes.

Uses

  • Food Factories
  • Workshops
  • Production Areas
  • Walkways
  • Corridors
  • New or Old Floors
  • Supermarkets

Features & Benefits

  • Mechanical preparation can be avoided
  • Reduced noise and vibration during installation
  • Reduced dust compared to mechanical techniques
  • Overlaying certain finishes is possible
  • Overlaying sheet flooring or tiles
  • Substrates with light contamination can be overcoated
  • Can accommodate most floor finishes
  • Rapid Installation
  • Uses Solvent Free Epoxy Resins
  • Waterproof

System Structure

  1. Clean the floor.
  2. Roll out Sikafloor Resiplot mesh.
  3. Drill and fix Sikafloor Resiplot anchors.
  4. Fill anchor holes with Sikafloor 156 or Sikafloor 161.
  5. Cover mesh with Sikafloor 156 or Sikafloor 161 (min 1.2 kg/m2)
  6. For finishes requiring a mechanical key, apply a second coat of Sikafloor 156 or Sikafloor 161 (0.4 kg/m2). Fully blind with sand.
  7. Apply finish covering:
  • Cementious underlay (Sikafloor Level)
  • Resin coating
  • Bonded tiles
  • Bonded PVC or carpet
  • Bonded timber

Application (Mesh and Fixings)

Unroll the Sika Resiplot mesh onto the floor and turn over to prevent mesh curling. Cut the material to suit the shape of the floor overlapping all joints by 100mm.

Drill through the mesh at 400mm centres, a series of 12mm ∅ 50 mm depth holes. Remove dust from bolt holes using the drill vacuum dust extraction system or separate extraction unit.

Place the Sika Resiplot anchors into the holes, through the mesh.

Ensure the mesh remains flat and without creases.

Provide additional anchors at all corners, angles and edges where the normal anchors are not within 50mm of the edge/angle/corner.

Application (Resin)

Mix the Sikafloor 156 or Sikafloor 161 in accordance with the technical datasheet. Pour mixed Sikafloor 156 or Sikafloor 161 into the anchor holes and ensure that they are full before applying the remainder of the Sikafloor 156 or Sikafloor 161 evenly to the entire floor area by squeegee.

Ensure the anchors and mesh are fully covered. Consumption will vary according to the profile of the substrate. Allow at least 1.2 kg/m² of Sikafloor 156 or Sikafloor 161. Porous or irregular surfaces will require more Sikafloor 156 or Sikafloor 161. Allow to cure.

If the subsequent floor finish requires a broadcast/sand finish as a mechanical key, apply a second coat of Sikafloor 156 or Sikafloor 161 once the first coat is cured and fully blind with Sika Quartz Sand 0.3-0.8mm or larger.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00














£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)

BT, IM

£50 (Standard 2-3 Day Delivery Only)

JE, GY

Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

Sikafloor Resiplot TDS

Download

Sikafloor Resiplot Brochure

Download
IMPORTANT
Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.