Sika Release Oil
Sika Release Oil is a high quality, sprayable chemical release agent for use on all types of standard formwork materials. It is a solvent and mineral oil free emulsion based on biological degradable synthetic oil and is recommended for application to moulds manufactured from wood, metal, plastics and more which are susceptible to long term damage by conventional release agents.
Sika Release Oil is a high quality sprayable chemical release agent for use on all types of standard formwork materials. It is a solvent and mineral oil free emulsion based on biological degradable synthetic oil and is recommended for spray application to moulds manufactured from wood, metal, polypropylene, ABS, polyurethane and other plastics which are susceptible to long term damage by conventional release agents. Produces a high quality stain and blemish free concrete finish with minimum incidence of blowholes.
- Excellent ‘sticking’ ability on vertical mould surfaces
- Self-levelling after spray application
- Non-combustible vapour
- Reduced ‘dusty’ residues on the formwork
- Safe for the operatives to handle
- Easy and precise separation of the formwork from the hardened concrete
- High quality surface finish
- Protection of formwork from steel corrosion and early ageing
Areas For Use
As a sprayable/brushable release agent for smooth non-absorbent formwork, absorbent formwork, heated formwork (up to 70°C) and textured formwork.
Only apply a thin film. Overdosing can cause dusting
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close