Sika Primer 290 DC
Sika Primer 290 DC is a transparent, pale yellow, low viscosity liquid that cures by reaction with atmospheric moisture. It is used to prime timber decking strips prior to caulking with Sikaflex 290i DC or bonding with Sikaflex 298. Suitable for use on teak, mahogany, Oregon pine, cork and GRP based on polyester.
Sika Primer 290 DC is a transparent, pale yellow, low viscosity liquid that cures by reaction with atmospheric moisture. It is used to prime timber decking strips prior to caulking with Sikaflex 290i DC or bonding with Sikaflex 298. Sika Primer 290 DC is manufactured in accordance with ISO 9001 / 14001 quality assurance system and the responsible care program.
Sika Primer 290 DC is formulated for use on the following substrates:
- Oregon pine
- GRP based on polyester
This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 100 - 200 ml/m²
- Touch Dry
- Brush, Spray
Be the first to ask a question about this product!
Sikaflex Floor (available in packs of 20x 600cc sausages) is a 1-part, solvent free, PU based moisture cured, elastic sealant that provides a cost effective floor joint sealant system for industrial pre-cast concrete. Image already added
Remmers Joint Mortar is a dry mortar for the repair of masonry work joints made of mineral binders, natural aggregates and alkali resistant, lightfast pigments. For the production of horizontal and vertical joints in walls, pillars and partition walls made of load-bearing and non-load-bearing masonry work and for subsequent, manually applied pointing in...
Remmers IR PUR 250 is a flexible one-component PUR injection resin for sealing of water-bearing cracks and porous, water-soaked areas in concrete and masonry. It is waterproofing, has very good penetration, reacts with moisture: contact with water is necessary for the reaction and hardening of the foam, resistant against damaging soluble...
SikaFuko VT 2 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress. To seal the joint SikaFuko VT 2 can be injected with suitable Sika injection materials including acrylic and polyurethane resins, or microfine cement suspensions.
Sikadur 52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin. Type N (= Normal Potlife) is used for substrate temperatures between +5°C and +30°C (UK). Used as an injection resin with good adhesion to concrete, mortar, stone, steel and wood. Suitable for both, dry and damp...
SikaProof Patch 200 B is a self-adhesive tape, consisting of a SikaProof membrane laminated with a Sikaproof Butyle adhesive that is covered with a release liner. SikaProof Patch 200 B is used for post-sealing of joints, penetrations as well as damages outside on the membrane side of the SikaProof A05/A08/A12 system.
SikaBond AT Metal is a one part, solvent-free, elastic adhesive for porous and non-porous substrates, particularly for metals and for the following applications: Internal and external bonding of metal façade and roof elements, roof coverings, cover plates, metal sheets, sky lights, bonding of metal cladding etc. Excellent workability, short cut off...
SikaFuko VT 1 is an injectable hose system with unique integral ‘valves’ for sealing and possibly resealing construction joints in watertight structures against water and salt water ingress. It is cast into the construction joints with the concrete. Can be injected with suitable Sika injection materials including acrylic and polyurethane resins, or...
SikaProof ExTape 150 is a self-adhesive tape, consisting of a butyl rubber adhesive that is covered with a divided release liner. SikaProof ExTape 150 is used to adhere and seal joints and overlaps of the SikaProof A sheet membrane system, as well as to execute details and connections where required on the membrane layer side of the system.
SikaBoom S is a 1-component, easy application, fast curing expansive polyurethane fixing foam made for filling and insulating. SikaBoom S is designed for fixing, insulating and filling connection joints around windows and door frames, pipe entries, air-conditioning vents and electrical equipment. SikaBoom S allows insulation against noise, cold and...
The Sikadur Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system consists of a modified flexible Polyolefin waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different...
Sikaflex 521 UV (available as a pack of 12 x 300cc or 20 x 600cc cartridges/sausages) is a one-component PUR-Hybrid sealant based on the Sika Silane Terminated Polymer (STP) technology. The product cures on exposure to atmospheric humidity to form a durable elastomer. Ageing and weathering resistant, it bonds well to a wide variety of substrates. Image...
Sikasil 670 Fire is a fire rated one part, moisture curing, low modulus elastic joint sealant suitable for movement and connection joints. Up to 4 hours fire resistance according to EN 1366-4, outstanding weathering and ageing resistance, movement capability of ±35% (ASTM C 719), easy to smooth and very good workability, good adhesion to a wide range of...
Sikasil Pool is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas. It is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other...