SikaGrout 3200 is a fast hardening, high early strength, high final strength, 1-component, shrinkage compensated, free flowing cementitious grout for structural filling of joints and under grouting base plates. High performance precision grouting of vertical or horizontal joints for onshore steel and pre-cast concrete wind towers.
Sika Mix&Go Multi-Purpose Mortar
Sika Mix&Go Multi-Purpose Mortar is a very easy to use, one part cement based repair mortar in a special mix-in-the-bag pack for speed and convenience. Ideal for steps, stairs, paths and drives, balconies and window sills, posts, gutters and gullies, walls and paving. Mix in the bag, application tool included, just add water!
Sika Mix&Go Multi-Purpose Mortar is a very easy to use, one part cement based repair mortar in a special mix-in-the-bag pack for speed and convenience.
For small repairs of concrete, masonry, brick and block in:
- Steps, stairs, paths and drives
- Balconies and window sills
- Posts, gutters and gullies
- Walls and paving
- Coverage / Usage Approx: 0.7L volume
Features & Benefits:
- Mixing and application tools included - just add water
- Mix-in-the-bag for quick and easy repair works
- Handy pack size - easy to carry
- Bonds to most common building materials
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
SikaTop Armatec 110 EpoCem is a bonding primer and reinforcement corrosion protection. SikaTop Armatec 110 EpoCem is a cementitious, epoxy resin compensated three component coating material with corrosion inhibitor, used as bonding primer and reinforcement corrosion protection.
Remmers Multi Filler is a universal surface filler that is highly modified & fast hydraulic setting. Adjusted to the desired consistence by adding more or less water and is easy to apply in thin or thick layers. Image already added
Betofix R4 EM is a factory-mixed, cementitious, dry mortar that is ready to use after mixing with water and sets hydraulically. It can be produced with all conventional positive mixers. It hardens with little shrinkage or inherent stress. Polymer additives improve flexural tensile strength. The hardened screed mortar is resistant to water, weather and...
Sika Ebonex is a discrete impressed current cathodic protection anode, specifically designed to protect reinforced concrete structures and steel framed buildings. The anode utilizes an innovative ceramic / titanium composite, combined with an integral gas venting system. The system utilises Sika Ebofix Grout, a high density, acid buffering grout used for...
Sikadur 12 Pronto is a fast curing, self smoothing two part resin mortar based on reactive acrylic resins. Sikadur 12 Pronto is a fast curing multi purpose repair mortar for concrete roadways, runways, car park decks, industrial floors, stairs, precast concrete units etc. Can also be used as a grout for bridge bearings, foundations and rails, anchors and...
Remmers Betofix HQ3 is a cement-bound, chloride-free, factory-mixed, dry mortar that is ready to use after mixing with water. It can be produced with all conventional positive mixers. The grout material achieves very high early and ultimate strength in connection with very good flow and pumping properties. Image already added
Sika Galvashield Embedding Mortar is a controlled resistivity mortar for use with Sika Galvashield discrete corrosion protection anodes. The mortar is designed to provide a low resistance environment around the anode and improved performance.
SikaCem 133GP Gunite is a cement based, polymer modified one component general purpose repair mortar containing silica fume and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. Formulated for machine applications using the dry process without set accelerators, repairs may be profiled and trowel finished where necessary.
SikaCem 133F Gunite is a dry sprayed fibre reinforced micro repair concrete. SikaCem 133F Gunite is a one component dry sprayed fibre reinforced micro-repair concrete with non-reactive aggregates.
SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout which meets the requirements of BS EN 1504-6. Used for the anchoring of reinforcing bars, general purpose grouting, under stanchion plates, filling cavities, voids, gaps and recesses, sealing around penetrations, machine and base plates, post fixings. For...
Sika Accelerator is a chloride free liquid admixture for set acceleration and rapid hardening of cement based mortar, concrete, screeding and render. Also provides frost protection in the wet mortar during the setting period; even in sub-zero temperatures (down to –8°C). May also be used neat with cement as a plugging aid. Non-corrosive to metals so may...