Class 0 fire rated finish on bare or previously painted non-combustible surfaces
Hard wearing, water-based acrylic eggshell, matt or solvent-based gloss finish
High coverage rates
Important:
This product is for Professional and/or Industrial use only. It is not permitted for Consumer use and certification will not be issued unless applied by a competent contractor.
Zeroflame Aquasteeel WB+ Finish is an exceptionally hard wearing decorative finish for application over Zeroflame Aquasteel WB+ Intumescent Coating and as a Class 0 fire rated finish on bare or previously painted non-combustible surfaces.
Aquasteel WB+ Finish is available as a water based acrylic eggshell or solvent based gloss finish. Both Eggshell, Gloss and Matt finishes are available in nearly all BS, RAL and NCS colours.
Apply at a rate of 12m² per litre/per coat for Eggshell and 14m² per litre/per coat for Gloss over Zeroflame Aquasteel WB+ Intumescent Coating, one coat is normally sufficient but for dark contrasting colours two may be required. Allow a minimum of 16 hours after the final coat of Aquasteel WB+ basecoat has been applied before applying topcoat.
Features and Benefits
Easily applied by brush, roller or spray
Hard wearing matt, eggshell or gloss finish
High coverage and wide colour range
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Image already added
Product Details
11097-1006349
Data sheet
For Use By
Professional Use
Interior / Exterior Use
Interior Use
Single, Two or Three Pack
Single
Application
Brush, Roller, Spray
Coverage
12m² per litre (Eggshell, Matt), 14m² per litre (Gloss),
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
CLEARANCE - Zeroflame Aquasteel WB+ Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A Fire Retardant Treatment for use on bare, solid wood with a minimum thickness >12mm:Soaks virtually ‘invisibly’ into the wood Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*) Can be overcoated for decorative purposes with waterborne, non-flammable stains, varnishes and paints For internal and external...
White thin-film waterbourne intumescent coating with new and improved formula to provide 30 and 60 minutes fire resistance on standard structural steel members in internal environments. It provides an easier and more efficient alternative to cladding steel members in plasterboard.New improved formula Achieves both 1/2 hour and 1 hour fire...
A matt white, single-pack waterborne coating for wood that reduces ignitability for interior surfaces.Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*) Can be overcoated with waterborne, non-flammable paints Simple certificate application following purchase and application Internal use Can be applied by...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...