Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
There are 19 products.
Active filters
Tikkurila Temafloor 220W Primer is a two component solvent-free varnish used for priming of new and old concrete floors, especially where solventless and odourless products are needed.For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. Good resistance against oil and grease. Suitable for priming...
£383.40 (incl. VAT)
£319.50 (ex. VAT)
Fosroc Nitoflor DPM is a two-component, solvent-free liquid applied surface damp proof membrane and residual moisture suppressant for concrete floors. Suitable for use as an overlay damp roof membrane to cementitious surfaces which were laid without an underlaying damp proof membrane. Nitoflor DPM permits early overlaying with vinyls,...
£647.62 (incl. VAT)
£539.68 (ex. VAT)
402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes.Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050...
£120.00 (incl. VAT)
£100.00 (ex. VAT)
402 WG Damp Proof Coating has been developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required.Available in 4,400+ colours, inc....
£126.00 (incl. VAT)
£105.00 (ex. VAT)
401 Epoxy Floor Primer is a two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Ideal for use as a clear sealer on concrete and masonry surfaces.Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS...
£96.00 (incl. VAT)
£80.00 (ex. VAT)
Specifically formulated to carry out preliminary priming treatments on surfaces before applying epoxy and polyurethane resin systems from the Mapefloor range, self-levelling cementitious mortars from the Ultratop/Ultratop Living range and of Ultratop Loft, to protect and coat civil and industrial floors, terrazzo floors and cementitious...
£166.07 (incl. VAT)
£138.39 (ex. VAT)
Ardex DPM is a one coat damp-proof epoxy resin; After hardening, produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength - excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids.One coat solvent free, low viscosity, two component epoxy resin...
£153.92 (incl. VAT)
£128.26 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Size
Size
