Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
SL Floor Coating Rake is an adjustable leveler for spreading floor coatings and screeds in one easy application. It is ideally suited to use with any floor coatings that have good flow characteristics.
SL Floor Coating Rake is an adjustable leveler for spreading floor coatings and screeds in one easy application. It is ideally suited to use with any floor coatings that have good flow characteristics. It is 600mm wide and is simple to adjust, made from 1.6mm stainless steel with an aluminium pin plate holder incorporating five steel pins. It is easily adjusted from 0mm to 15mm for speedy set up.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Use a Heskins Rubber Mallet with Comformable Safety-Grip, helping it conform to any irregular surface it is applied to. The mallet head is rubber to prevent damage to the surface, increasing the service life of conformable anti slip tape.
Our wire brushes are ideal for preparing a range of substrates and existing painted surfaces prior to painting. Mostly used for preparatory work, removing rust, scale, old paintwork and pointing they are made from quality hardened, tempered steel bristles with a hardened steel scraper attachment for heavy duty scraping.
Paint Kettles are handy paint holders in various sizes to assist and ease application. Paint kettles are very handy in areas where application is difficult, access is tricky or detail is required.
Our Mixing Paddle (100mm x 600mm) fit a standard drill for easy and efficient mixing of our paints, coatings and mortars. Mixing is an essential part of the painting process and is especially important when using two pack products.
Remmers Toothed Blades Rubber are for use in Remmers Toothe Blade Holder (5028).
Our Repair Materials Application Kit provides everything you need to apply our repair products to floors, walls and other surfaces. It makes on site application much easier by providing everything you need to mix, prepare, apply and clean up in one handy kit.
External paint brush from mineral paint specialist, Keim. This product is available as POA. Click here to email us for more information
Paint brush, optimum for application of Keim Lasur systems. This product is available as POA. Click here to email us for more information
Magpaint Europe Sketch Marker Pens are specifically designed to work well with Sketch Paint coatings, allowing ideas, messages, reminders and appointments to be made on the dry-erase surface. Available in individual colours as well as multi-packs of 4 black markers, or 1 each of green, blue, red and black.
A range of accessories to be used with Sika AnchorFix 1 fast curing anchoring adhesive. The range includes; Sika AnchorFix Mixer Nozzles, Sika AnchorFix Brushes, Sika AnchorFix Blow Out Pump, Sika AnchorFix Sleeves and Sika AnchorFix Extension Tube.
Rustoleum De-Aeration Roller is a special spiked roller for use with selected Rust-Oleum Mathys coatings, which while wet must be spiked during application to release air to ensure a bubble-free finish. The operation of spiking also largely contributes to the levelling of most self levelling coatings and screeds. Sold as complete assemblies...
Remmers Mixing Paddles
Remmers Gloves are for resin handling - (pair)
Rust-Oleum Asphalt Repair Tamper is a 4.5 Kg square tamper with a 1370 mm steel shaft which ensures the optimum application of Rust-Oleum Asphalt Repair. An asphalt tamper allows the user to work in confined areas of limited space, and corners, where machines and other tools may not easily be able to access.
Our 4" Roller Kit is ideal for line marking and painting smaller areas on steelwork, walls, roofs, etc. It contains 2 sleeves, one is a durable, long life woven fabric for an all round performance, coverage and finish and the other is a high density superfine foam for a smooth finish on flat surfaces.
Our 6" Gauging Trowel is made from welded alloy stainless steel with moulded PVC handle with soft-grip finish, ideal for mixing and applying smaller areas of repair mortars and screeds.
