HMG Pre Cat AV Colours Aerosol

AERPRECAT
HMG5729
Trustpilot

HMG Pre Cat AV Colours Aerosol is a fast drying 1K lacquer with good film build and excellent application characteristics. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG Pre Cat AV Colours.

  • 400ml/16oz Aerosol
  • Available in packs of 1 or packs of 6+, 50 and 100 with discounted price breaks
  • Available in 5,000+ colours from RAL, NCS, and British Standard
  • Formulated for use on wood substrates
  • For interior use only

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£33.33(ex. VAT)
£40.00 (inc. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

HMG Pre Cat AV Colours Aerosol is a fast drying 1K lacquer with good film build and excellent application characteristics. Available in a range of coloured sheen finishes. This product has also been designed to be “Ready for Use”, for the non-aerosol version of this product please see HMG Pre Cat AV Colours.



Click To Jump To Section:



Features & Benefits

  • 400ml/16oz Aerosol
  • Available in packs of 1 or packs of 6+, 50 and 100 with discounted price breaks
  • Available in 5,000+ colours from RAL, NCS, and British Standard
  • Formulated for use on wood substrates
  • For interior use only



Product Specification

Technical Data
Volume Solids: 11.8 %
VOC Content: -
SG: -
Viscosity: -
Density: 0.774 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life: 12 months from delivery date in original sealed containers
Flash Point: -42°C



Film Thickness Range And Coverage

Product Data
  Dry Film Thickness Wet Film Thickness
Aerosol: 25 μm 70g/m² μm



Coverage: 10 square metres per litre @ 25 microns dft (theoretical)

  • HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness
  • These values are a guide only and are not to be used as specifications
  • Film thickness will vary depending on actual use and specification
  • Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness



Drying Times

Drying Times At 20°C
Touch Dry: 10 minutes
Dry To Recoat: 10 minutes minimum, 6 hours maximum
Hard Dry: 60 minutes



Surface Preparation

  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
  • Read and follow the safety data sheet, product data sheet and label instructions
  • Stir all paints thoroughly before use
  • Always use the same batch number on the same job
  • Check colour & sheen
  • Filter the product immediately before use
  • Reduce emissions and maintain quality by replacing tin lid after use



Application Methods

Technical Data
Aerosol
Mixing Ratio: Ready for use
-
Thinner Options: n/a
-
Viscosity: -
Spray Gun Setup: -
Number Of Coats (Guide Only): 2 - 3 coats
Flash Off: 10 minutes between coats



Product Notes

Information on basic physical and chemical properties
Form: Aerosol
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value: Not determined
Change in Condition
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: -24.9°C
Flash Point: -42°C
Flammability (solid, gas): Not applicable
Ignition temperature: 235°C
Decomposition temperature: Not determined
Auto-ignition temperature: Product is not selfigniting
Explosive properties: Not determined
Explosion limits: Lower: 3.0 Vol %
Explosion limits: Upper: 18.6 Vol %
Vapour pressure at 20°C: 5200 hPa
Density at 20°C: 0.774 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: Not determined
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 88.2%
Solids content: 11.8%



Health & Safety

  • Refer to the Safety data sheet in the attachments section above and tin label prior to use

Product Details
5729-893374

Data sheet

Manufacturer
HMG Paints Limited
Interior / Exterior Use
Interior
Interior / Exterior Use
Interior
Water / Solvent Based
Solvent
For Use On
Wood
Application Method
Aerosol
Sheen
Gloss
Matt
Satin
Semi-Matt
Colour
Fully Tintable
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
400ml/16oz Aerosol
Touch Dry (at 20°C)
10 Mins
Dry to Recoat (at 20°C)
10 mins minimum, 6 hours maximum
Fully Cured (at 20°C)
60 Mins
Density
0.774 g/cm³
Solids by Volume
11.8 %
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Recommended Dry Film Thickness
25 μm
Recommended Wet Film Thickness
70g/m² μm
UN Number
UN1950
Flashpoint
-42°C
Suitable For Use On
Wood
Finish
Satin
Finish
Semi-Matt
Finish
Matt
Finish
Gloss
Application Method
Aerosol
Product Type
Topcoat
Product Range
Pre Cat
Colour Family
Beige
Colour Family
Yellow
Colour Family
Green
Colour Family
Clear
Colour Family
Red
Colour Family
Neutral
Colour Family
Pink
Colour Family
Stone
Colour Family
Anthracite Grey
Colour Family
Purple
Colour Family
Grey
Colour Family
Black
Colour Family
Blue
Colour Family
White
Colour Family
Brown
Colour Family
Metallic
Colour Family
Orange
Attachments
Download
Product Data Sheet
Download
Safety Data Sheet
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

HMG Pre Cat AV Colours Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
HMG Pre Cat AV Colours

HMG Pre Cat AV Colours

HMG Pre Cat AV Colours is a fast drying 1K lacquer with good film build and excellent application characteristics. Formulated for use on wood substrates For interior use only Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG Pre Cat AV Colours Aerosol Please note: Colours are...

Price £19.02 (ex. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Pre Cat MDF Sealer

HMG Pre Cat MDF Sealer

HMG Pre Cat MDF Sealer is a high solids, clear, 1K primer/sealer for use on MDF. Fast drying Superb filling properties Ease of application Excellent sandability More Information Delivery Info

Price £48.02 (ex. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
HMG Pre Cat Standard Sealer

HMG Pre Cat Standard Sealer

HMG Pre Cat Standard Sealer is a 1K basecoat/sealer for use on wood and veneer. Fast drying. Contains no sterate. Excellent and easy sandability. Gives excellent and tenacious adhesion to wood with minimal preparation. Minimises sinkage of topcoats. Enables fast throughput of work to a high standard. More Information Delivery Info...

Price £150.97 (ex. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery