Specifically formulated for utility reinstatements. Great for bedding large section manhole covers and frames. BT LN550 and LN320 compliant Conforms to HA104/09 Can be used in the wet Combines as a bedding mortar and backfill Aids lateral stability
Instarmac UltraCrete QC10 F Rapid Set Flowable Concrete
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs.
- HAPAS Approved since 2005
- Shrinkage compensated
- Rapid set: 10-20 minutes
- 20N/mm² compressive
- Open to traffic: 90 minutes strength after 90 minutes
Instarmac UltraCrete QC10 F Rapid Set Flowable Concrete
QC10 F is a rapid setting, fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs. It has been HAPAS approved since 2005 and can be opened to traffic in 90 minutes.
- Workability: 5 – 10 minutes
- Set time: 10 – 20 minutes
- Depth: 30mm – 500mm
- 20N/mm² compressive strength after 90 minutes
- Shrinkage compensated
- Approved for use on the London Underground and Overground
QC10 F is a specifically formulated two-part polymer and fibre modified concrete for backfill around manhole frames and gullies and can also be used for surface repairs.
QC10 F contains special cements and graded aggregate, the product requires only the addition of water on site to form a high strength concrete. QC10 F is suitable for applications from 30mm - 500mm in one pass.
Full preparation and mixing instuctions can be found on the product data sheet
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 1 Part
- Key Features
- Workability: 5 – 10 minutes Set time: 10 – 20 minutes Depth: 30mm – 500mm 20N/mm² compressive strength after 90 minutes Shrinkage compensated Approved for use on the London Underground and Overground
- Compressive Strength (at 20°C)
- 90 minutes 20.00 1 day 35.00 7 days 50.00 28 days 60.00
- Tensile Strength
- 1 day 1.50 7 days 2.50 28 days 3.00
- Flexural Strength (at 20°C)
- 1 day 4.50 7 days 5.00 28 days 6.00
- Shelf Life (from date of manufacture)
- Shelf life from date of manufacture in correct conditions for sealed packaging is 8 months.
Be the first to ask a question about this product!
Market leading, rapid strength mortar, for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs. HAPAS approved since 2005 Conforms to HD27/15 Rapid strength gain Open to traffic: 60 minutes Shrinkage compensated
10mm grade - For permanent repairs in type 3 & 4 roads Easy work formula Easier to compact HAPAS Approved since 2002 Instantly trafficable No waste, resealable buckets Easy to apply Depth: 30-100mm Use in all weathers For planned repairs
A cold joint sealer that is applied onto vertical edges and surface base before the application of asphalt. HAPAS Approved since 2005 Prevents water ingress Improves bond Prolongs the life of your repair Can be used in all weathers
Designed for the application to asphalt roads to prevent water ingress and progressive fretting. HAPAS Approved since 2012 No waste, cut as required Prolongs the life of your repair Easy to use Fast installation Open to traffic: 10 minutes
PY4 produces a stiff supporting mortar, and is effective for the rapid installation and reinstatement of manhole covers and frames in heavily trafficked areas. Workability: 5 – 10 minutes Set time: 15 minutes Depth: 5mm – 50mm
Remmers Epoxy SIC Color is a textured, dissipative, hard grain coating that is conductive, provides slip-resistance, withstands mechanical/chemical loads and is physiologically harmless after curing. Slip-resistant Conductive Resistant to wear Can be subjected to mechanical loads Can be subjected to chemical loads Physiologically...
Coo-Var® Suregrip® Anti-Slip Floor Paint is already-mixed floor coating for suitably primed concrete, wood, metal and GRP which provides a rough, anti-slip finish when dry. Suregrip provides durability, decoration and protection. Suitable for indoor and outdoor use. Ideal For: Boats Steps and stairways Disabled ramps...
506 Anti Slip Dressing is sold in 10m² packs with each contain a flexible binding resin and decorative aggregate to create a 'stone carpet' finish which gives the appearance of loose aggregate, but avoids maintenance problems. Primarily used on outdoor walkways and concourse areas but can also be used internally to reflect the natural beauty of the outdoors.
Axalta Highway Anti-Skid Traffic Paint is a highly durable, fast drying, low-slip traffic paint based on a specially modified chlorinated rubber system. The coating is coloured with chemical and weather resistant pigments. developed as a traffic line / parking bay paint with low-slip properties, suitable for application to asphalt, concrete,...
501 Anti Slip Floor Paint is a ready mixed floor coating which creates a textured surface with excellent grip properties for foot and light truck traffic areas. Ideal anywhere anti slip properties are important providing durability, decoration and protection.
Smartkote Protectakote is a single component, ready-to-use, anti-slip coating with polyurethane performance for ultimate toughness. The course profile textured surface is ideal for interior floors, factory work-stations, walkways, stairs, ramps, vehicles and other areas where a flexible, durable and long lasting anti-slip surface is important....
Ennis-Flint MMAXGrip PRMX 45 is designed as a versatile MMA coating for application to bituminous substrates, possesses excellent abrasion-resistance and non-skid properties and was developed specifically as a heavy-duty surfacing and can be applied to asphalt substrates without a primer. The product is used as a priming surfacer, a topping layer and...
Jotun Jota Armour is a three component, abrasion resistant, polyamine cured epoxy coating specially designed as an anti-skid coating. Suitable for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Epo-Flex FX (formerly known as Resuflor FX), a 3-part self-smoothing polyurethane modified epoxy resin floor finish designed for industrial use, providing a hard wearing gloss finish between 2.5 - 3 mm thickness, which has a degree of seamless flexibility. Recommended for use in buildings with plywood or chipboard floor substrates, retail...
Smartkote Safekote is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s...
Smartkote Protectakote WB is a water-based anti-slip polyurethane coating. Its textured finish is ideal to create safe, anti-slip walkways, steps and ramps on light industrial and commercial floors, for both interior and exterior applications. This water-based solvent-free formulation is weather resistant, has a low odour, and is...
Blackfriar Professional Anti-Slip Floor Paint is an attractive, tough, durable and high opacity floor coating. Contains special aggregates for outstanding slip resistance. Useful for areas where safety is paramount, either internally or externally. Product Features Excellent slip-resistance Tough and durable coating Resists grease and...
Nu-Base SP Floor Finish is a fast-drying floor paint for protecting flooring substrates from mild chemicals and solvents, whilst giving an excellent decorative appearance. Advantages Fast-drying Standard or non-slip versions Available in all RAL colours Interior and exterior use Fast-drying 12-month shelf life
Ennis-Flint MMAXGRIP PRMX 65 is a MMA-based coating that was developed specifically for application to public main roads and side streets as well as other traffic zones. Its special properties make MMAXGRIP PRMX 65 particularly suitable for surfaces where coloured road markings are required on main roads and side streets in urban areas and elsewhere.
Resubind CP, a 3 component, non-pigmented, solvent-free polyurethane binder designed for car park decks, walkways and driveways, surface dressed with aggregates to create non-slip, hard wearing, textured floor finishes. Can be used in interior or exterior car park decks on a variety of substrates. Different aggregates can be used to create...
Sikafloor 264 N Thixo is a two part, economic, coloured epoxy resin textured roller and seal coat. This Sikafloor product is solvent free, thixothropic grade for high build textured and structured finishes.