- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Adesco Hi Tack Bonding Adhesive has been especially developed as a universal adhesive for bonding many building materials such as: stone, concrete, mirrors, glass, plasterboard, PU, uPVC, hard plastics, enamel, ceramic, copper, lead, zinc, aluminium, metals, stainless steel, HPL and cement fibre panels.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Certifications
- Surface Preparation
- Directions Of Use
- Cleaning
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Extremely high initial tack
- No need of fixation or support during curing
- High strength, high E-modulus and high mechanical resistance
- Free of isocyanates, phthalates, solvents and silicones
- Durable elastic
- No shrinkage and bubble free
- Non-corrosive to metals
- Neutral curing, almost odourless
- Good resistance to weather and moisture
- Adheres perfectly without primer on most, even damp, surfaces
- Skin formation in 15 mins at 23°C
Typical Properties
Technical Data | |
---|---|
Adesco Hi Tack Bonding Adhesive | |
Base: | Hybrid |
Density: | 1,57 g/ml |
Curing Time: | ± 2-3 mm/24 hours |
Shore A: | 55 Shore A (DIN 53505) |
Skin Formation: | 15 min (@23°C/55% RH) |
Tensile Strength: | 2,20 MPa (N/mm²) |
100% Modulus: | 1,39 MPa (N/mm²) |
Elongation At Break: | 335% |
Flow: | <2 mm (ISO 7390) |
Application Rate: | 20 (g/min @3mm/4 bar) |
Temperature Resistance: | -40°C to +90°C |
Frost Resistance During Transportation: | To -15°C |
Certifications
- Emicode EC1 Plus, M1
Surface Preparation
- Application temperature +5°C to +40°C (environment and substrate)
- Surfaces must be dry, clean and solid
- Adheres perfectly without the use of a primer to most non porous substrates
- Porous surfaces to be pre-treated with a suitable primer. Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information
- Always test adhesion prior to application
Directions Of Use
- Apply adhesive with the provided V-nozzle in a 'ventilating way' in vertical stripes with 10 - 20 cm distance in between
- Bring the materials into position and press well to make sure that the thickness of the adhesive is minimum 2-3 mm between material and surface
- Do not apply the adhesive in dots
- Because of the high initial strength support during curing is usually not necessary
- Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further information
Cleaning
- Cured adhesive can only be removed mechanically
Limitations
- Not suitable for PE, PP, PC, PMMA, PTFE, neoprene and bituminous substrates
- Not suitable for continuous water
Storage & Shelf Life
- Store in dry conditions between 5°C and 25°C
- Shelf life of 18 months when stored as recommended in original unopened packaging
Health & Safety
- Please refer to Material Safety Data Sheet for information
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Adesco
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete, Stone, Glass, Plasterboard uPVC, PU, Hard Plastics, Enamel, Ceramic, Copper, Lead, Zinc, Aluminium, Metal, Stainless Steel, HPL
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- Emicode EC1 Plus, M1
- Pack Size
- 310ml
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 18 months
- Touch Dry
- From 15 mins @ 20 °C
- UN Number
- N/A
- Hard Dry
- ± 2-3 mm/24 hours
- Base Type
- Solvent-Free
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Fibre Cement Board
- Suitable For Use On
- Metal
- Suitable For Use On
- Stone
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Glass
- Suitable For Use On
- Timber
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Application Method
- Application Gun
- Product Usage Type
- Adhesive
- Product Category
- Anti-Slip GRP
- Colour Family
- White
- Categorised As
- Anti-Slip > Fixings
- Seasonal
- Cold Weather
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Adesco Hi Tack Bonding Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT