We no longer stock this product, but can recommend Jotun Penguard Topcoat as a great alternative.
Jotun Jotafloor Topcoat is a two component amide cured epoxy coating that is a high performance product. It is easy to apply, tintable in a wide range of colours and has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If slip resistance is required Jotafloor Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Suitable on approved primers on concrete substrates.
Jotun Jotafloor Topcoat is designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Ideal for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities, dairies, warehouses, factories and hangars.
Approvals and certificates
- Determination of Bond strength to host concrete - BS 1881 : Part 207
- Determination of Crack Bridgeabilty - ASTM C884
- Determination of Rapid Chloride Permeabilty - AASHTO T277
- Determination of Water Permeabilty - DIN 1048
- Determination of Acid or Alkali Reaction - ASTM D543
- Determination of Weather or Salt Spray Test - N.F.C. Standard
- Determination of Impact Resistance - ISO 6272
- Determination of Shore 'A' hardness - ASTM D2240
- Determination of Taber Abrasion (1,000 Cycles) - ASTM D4060
- Determination of Toxicity - BS 6920
- Determination of Flame Spread - ASTM D1360
Additional certificates and approvals may be available on request.
Features & Benfits
- Good chemical resistance
- Good abrasion resistance
- Vast colour choice
- Brush, Roller, Spray
- 8.3 to 12.5m²/l
- Touch Dry
- 1.5 hours
|Louie joh agarrado on 2019-03-02 10:28:12|| |
What is the first apply the JOTAFLOOR SEALER COMP.B or JOTAFLOOR TOPCOAT A. (BASE 2).
Comp A and B should be mixed together before use, not used separately. Use a slow speed drill and mixing paddle. Pour the full contents of the mixed material onto the floor immediately after mixing is completed and use.
|daniel on 2018-11-14 06:54:15|| |
Ferric chloride resistant????
No it isn't but our 310 Chemical Resistant Coating is.
|geoff stedman on 2018-07-10 16:01:43|| |
Hi Would you need to prime a concrete floor that already has a floor paint applied? paint is stable and not flaking. Also what product would you recommend to recoat steel plate that is a walkway in a boilerhouse? Many thanks
To secure lasting adhesion to the subsequent product all surfaces should be clean, dry and free from any contamination. Jotun Jotafloor Topcoat would not require a primer to be applied before application to a clean, dry and undamaged compatible coating (ISO 12944-4 6.1), however we would recommend abrasion first to provide an adequate key for adhesion.
We would recommend something like Smartkote Protectakote UVR for your steel plate.
|Tim Maynard on 2018-04-26 03:13:58|| |
Hi Again! I think I need to re-word my previous questions: 1. Can JotaFloor Topcoat be applied directly to clean concrete? Or does it need a primer coat first? 2. I understand what Component A & B mean, but on Jutun website it shows varying pot life based on "Comp B (20)" and "Comp B (40)". What does that mean? Many Thanks! Tim