• Rust-Oleum Universal All-Surface Paint (Brush - Hammered)
  • Rust-Oleum Universal All-Surface Paint (Brush - Hammered)

Rust-Oleum Universal All-Surface Paint (Brush - Hammered)

We no longer stock this item.

You can find other all-surface paints and coatings, here.



Rust-Oleum Universal All-Surface Paint (Brush - Hammered) is a highly durable, hammered finish effect paint designed for direct application to many surfaces. Its advanced formula means it can be used for interior and exterior surfaces and can be applied directly to wood, metal, most plastics, ceramics and even rust. For non-ferrous and galvanised metal prime first with Rust-Oleum Universal Special Metals Primer. For stain blocking, particularly nicotine and tannin bleed, prime first with Rust-Oleum Universal Stain Block Primer.

Remove oil, grease and all other surface contamination by cleaning with appropriate detergents. Remove loose rust by scraping and wire brushing or sanding.

Stir Rust-Oleum Universal All-Surface Paint (Brush - Hammered) thoroughly prior to use. Apply 1-2 coats of product with a suitable brush or roller. For porous surfaces dilute first coat with 10% white spirit.

Up to 9m²/litre per coat. Coverage may vary depending upon method and rate of application and porosity of surface.

Drying Times:
Touch dry in 2 hours. Handle after 8 hours. Apply a second coat after 16 hours if necessary. Full hardness after 7 days. Not recommended for application in damp conditions or if the temperature is below 10°C.

After Use:
Remove as much paint from brushes as possible before cleaning. Clean with a suitable brush cleaner or soak in white spirit for 5-10 minutes, rinse and dry thoroughly.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Brush, Roller
9m² per litre
Touch Dry
2 Hours

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields
You might also like