• Sherwin-Williams Macropoxy M400

Sherwin-Williams Macropoxy M400

M400

We no longer stock this product, but can recommend Sherwin-Williams Macropoxy 400 as a great alternative.

Quantity
Product not available
This Product has been Discontinued

Description

Sherwin-Williams Macropoxy M400 (formerly known as Epigrip M400) is a 2-pack epoxy zinc phosphate primer, used as an anti-corrosive protection of carbon steel surfaces prepared by abrasive blast cleaning. For use in internal/external exposed conditions, but excluding offshore, petrochemical and immersed applications. 

Recommended Topcoats

Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.

For overcoating with alkyd systems consult Technical Team for advice. 

Product Details
M400

Data sheet

Manufacturer
Sherwin-Williams
Water / Solvent Based
Solvent
For Use On
Carbon Steel
Application Method
Airless Spray, Spray, Brush
Sheen
Eggshell
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
20L
Application
Brush, Spray
Coverage
7.6m² per litre
Touch Dry
2 hours
Brand
Sherwin-Williams

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send