We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum Biosan Aqua Satin is ideal for walls and ceilings where hygiene control is essential in low wear areas. Offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment.
Available in 1,500+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
Decorative hygienic paint in gloss, satin or mat in almost any colour
Good flow, filling and hiding power
For use on masonry, plaster, wood or concrete
Ideal for schools, dressing rooms, kitchens etc
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Don't forget to save your customization to be able to add to cart
Rust-Oleum Biosan Aqua Satin offers high durability, perfect saponification resistance, particularly high covering capacity and helps to maintain a hygienic environment. Rust-Oleum Mathys Biosan Aqua Satin is for the interior coating of walls and ceilings in low wear areas where controlled hygienic condition are of essential importance.
Features & Benefits
• Single pack water based hygiene wall coating • Low odour, high coverage • Good flow, filling and hiding power • Easy to apply • On primed woodwork, masonry, plaster or concrete • Available in 1,300+ colours
A healthy concept...
Significant extra hygienic protection is guaranteed with Biosan® Hygiene Coatings for walls, ceilings and floors. Biosan® contains the unique antibacterial agent BACTRON ™, which surrounds and partly penetrates the resin and pigments;
The active ingredient of BACTRON™ has been scientifically proven to kill most types of bacteria, including ‘super bugs’, by a variety of different mechanisms.
Unlike some other biocides and antimicrobial additives BACTRON™ is not classified as harmful to humans. The active ingredient has food contact approval in the USA and EU.
Biosan® with BACTRON™, supported by good housekeeping practices, is the ideal solution for the maintenance of a hygienic environment in areas where cleanliness is of utmost importance, e.g. hospitals, food processing plants, kitchens, dairies, breweries, abattoirs, leisure centres and schools.
Where surfaces are subjected to severe wear or vigorous cleaning, the antibacterial properties of Biosan® are constantly replenished, providing on-going protection against the harmful effects of bacteria throughout the normal service life of the coating.
Biosan® products are formulated using unique modern water based technology. When used in accordance with instructions, Biosan® is entirely safe. All Biosan® products are classified as non-flammable. Most Biosan® products are rated Class 0 surface spread of flame based on BS 476: Part 6 & 7.
Bactericidal action can be quantified and shown graphically. The image on the left of two Petri dishes compares the ‘kill’ rate of Biosan® containing BACTRON™ (blue) with a control (red) when challenged with Staphylococcus aurous. It uses a logarithmic scale to show that Biosan® with BACTRON™ kills 99% of bacteria during the initial 48 hours. After 7 days the bacteria cannot be detected on the BACTRON™ protected sample whereas significant numbers of potentially pathogenic (disease causing) bacteria are still surviving on the unprotected coating.
The unique antimicrobial action of Biosan® has been independently tested and verified by a DEFRA approved laboratory!
Density: 1,2 - 1,4
Gloss Level: Gloss, Matt, Satin
Solids content in volume: 35-50 %
Solids Content in weight: 50-65 %
Drying Times At 20°C/RH 50%
Touch dry: 45 minutes
Dry to handle: 1 hour
Dry to recoat: 4 hours (Gloss/Matt), 8 hours (Satin)
Fully cured: 2 days
10 - 12 m²/l (Gloss/Satin), 7 - 10 m²/l (Matt)
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Do not apply in full sun or too hot conditions, to avoid that the product dries too fast and consequently to avoid a decreased flow. The use of Biosan products does not exclude the necessity to clean and disinfect on a normal and regular basis.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
For Use By
For Use By
Interior / Exterior Use
Water / Solvent Based
Single, Two or Three Pack
Brush, Roller, Spray
Dry to Handle (at 20°C)
Dry to Recoat (at 20°C)
4 hours (Gloss/Matt), 8 hours (Satin)
Fully Cured (at 20°C)
7-10m² per litre
Min. Application Temperature
1,2 - 1,4
Solids by Volume
Shelf Life (from date of manufacture)
2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum Biosan Aqua Satin is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...