Remmers PUR Top Accelerator is a VOC free liquid additive used to accelerate the curing time of Remmers PUR Top polyurethane systems. Remmers PUR Top Accelerator can be easily added and mixed into the Remmers PUR Top polyurethane systems. The addition of the accelerator will increase the speed of cure and will not affect the final characteristics of the PUR Top product.
Ensure that the lid of the tin is secure prior to thoroughly shaking the PUR Top Accelerator tin by hand for approximately 30 seconds. Commence mixing of the PUR Top polyurethane product using an electric drill and paddle and then add using a syringe the required dose of PUR Top Accelerator ensuring that products are continuously and thoroughly mixed throughout this period.
Application rate depends on the required curing speed and the selected PUR Top product that the PUR Top Accelerator is added to. Consult Technical Department for further advice prior to use.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!