We no longer stock this product, but can recommend Rust-Oleum 4900 Polycoat 2K as a great alternative.
Mathys Divalo is a waterborne varnish based on pure acrylic resins to be used as a finish on indoor paints and decorative paint systems to provide a durable, high wear surface. Mathys Divalo does not yellow, has easy application with a roller or brush, produces a uniform finish and is washable.
Clean and degrease the substrate and apply Mathys Divalo in 1 or 2 coats as required, the paint coats or systems that have to be protected must be dry and/or fully cured.
Features & Benefits
- Not yellowing
- Smooth satin views
- Density: 1,02 - 1,06
- Gloss Level: Satin
- Gloss level at 60º: Satin Gloss: ± 20%
- Solids content in volume: 27,5 - 30,5 %
- Solids Content in weight: 30 - 33 %
Drying Times At 20°C/RH 50%
- Touch dry: 30 minutes
- Dry to recoat: 4 hours
- Fully cured: ± 1 week
12 - 14 m²/l
Practical coverage depends on many factors such as pososity and roughness of the substrate and material losses during application.
Clean and degrease substrate. The paint coats or systems that have to be protected have to be dry and/or fully cured.
Direction For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
> 5°C, max. 80% R.H
- Brush: Apply undiluted.
- Roller: Apply undiluted.
- Airless Spray: Nozzle: 09 - 013 / Pressure: 180 bars
- Air-Atomised Spray: If required dilute with water.
- Base Type
- Water based
- Interior/Exterior Use
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- ± 1 week
- 12m² per litre
- Min. Application Temperature
- 1,02 - 1,06
- Solids by Volume
- 27,5 - 30,5 %
- 90 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans. If stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 30 mins
- Recommended Dry Film Thickness
- ± 20 µm
- Recommended Wet Film Thickness
- ± 70 µm
- UN Number
- Not regulated
|David Hughes on 2016-09-21 11:10:18|| |
Question: Could this paint be used to protect emulsion paint which has been applied to a radiator, please? Best wishes David Hughes
Yes, but this will not have any affect on whether or not the paint will "yellow" as a result of the heat coming from the radiator.