Rust-Oleum 2800 Fluorescent Ground Marking Aerosol


We no longer stock this product, but can recommend Rust-Oleum 2800 Ground Marking Aerosol as a great alternative.



We no longer stock this product, but can recommend Rust-Oleum 2800 Ground Marking Aerosol as a great alternative.

Rust-Oleum 2800 Fluorescent Ground Marking Aerosol is a quick drying quality paint for professional marking purposes at public works (utility works/telecom) building works and industrial sites and adheres to almost any substrate. By means of the 360° valve the aerosol is sprayable in all directions and is based on a fast drying acrylic resin that are aromatic free and based on lead and chromate free pigments.

Rust-Oleum 2800 Fluorescent Ground Marking Aerosol can be used on metal, concrete, asphalt, gravel, soil and grass, etc. They are not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Rust-Oleum 2800 Fluorescent Ground Marking Aerosols are designed for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.

Features & Benefits

  • Economical, safe and easy to use
  • Optimised for ground marking
  • Spray through cap for ease of use
  • Easier marking
  • Quick drying

Technical Data

  • Gloss Level: Matt
  • Propellant: Dimethyl ether
  • Heat Resistance: 100°C (dry heat)

Drying Times At 20°C/RH 50%

  • Touch dry: 5 minutes
  • Dry to handle: 30 minutes

Surface Preparation
Remove dirt, grease, oil and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

Application Conditions

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.
Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. It is not possible to clean the spray button in the usual way. Due to the use of the 360° valve this is not necessary

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Dry to Handle (at 20°C)
30 Minutes
1.5m² per 500ml Aerosol
Heat Resistance (up-to)
100°C (dry heat)
Shelf Life (from date of manufacture)
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Touch Dry
5 mins
UN Number

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields