Access ramps are important to provide provision for those with mobility disability. All ramps are engineered to exceed current DDA legislation. All ramps are manufactured to ISO 9001 standards so you can be sure that every ramp is of the highest quality.
The Rust-Oleum Fibreglass Standard Access Ramp is essential for overcoming physical barriers at your premises for disabled persons. Access ramps are the most economical solution for dealing with these barriers.
- Slip resistant top surface
- Meets DDA Regulations
- Lightweight and Portable
- High Quality Fibreglass & Aluminium
- High load capacity
- Private Building Access
- Commercial Building Access
- Fire escapes
- Interior steps
- Exterior steps
Load capabilities: 250kg
Design life: 10+ years (subject to traffic analysis)
General use: Standard pedestrian, wheelchair/mobility scooter traffic
Meets DDA Regulations
The Disability Discrimination Act states that service providers have to make "reason-able adjustments" in relation to the physical features of their premises to overcome physical barriers to access. Any of the Rust-Oleum´s Ramps should be able to help with this requirement.
Slip Resistant Surface
All ramps incorporate our standard grit top surface providing an excellent slip resistant surface even in extreme weather conditions. An important factor given ramps are gen-erally used externally.
High Quality Materials
If you are choosing either the fibreglass or aluminium ramps you can be assured that both sets of ramps are made to an extremely high specification ensuring the products long life even in external applications.
High Load Capacity
With the increasing number of motorised access vehicles on the market, sometimes weighing up to 100kg, the high quality construction means that the ramps are able to cope with loads of up to 300kg.
Ramp Material: Fibreglass (GRP) framework with carbon and silicone grit top surface.
Small Ramp - (L)600mm x (W)875mm, weight 5kg
Medium Ramp - (L)900mm x (W)875mm, weight 8kg
Large Ramp - (L)1200mm x (W)875mm, weight 10kg
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!