Keim Contact Plus Grob
Keim Contact Plus Grob is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
- Resistant to UV
- Equalises textures
- Non-film forming
- Breathable finish
This product is available as POA. Click here to email us for more information
KEIM Contact Plus Grob is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and KEIM Mineral Paints. KEIM Contact Plus Grob contains glass fibres and silicate minerals in consistent grain sizes and shapes.
Top Features & Benefits
Keim Contact Plus Grob will fill cracks up to 1mm wide, ready for overcoating with Keim Contact Plus. See below for additional features:
- Resistant to UV.
- Equalises textures.
- Non-film forming.
- Breathable finish.
Preparation & Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Mineral Paints may proceed.
Dilute Keim Contact Plus Grob with the appropriate system dilution at 1 lt per 10 kg. Apply uniformly with brush or roller. Clean tools with water immediately after use.
Be the first to ask a question about this product!