Nullifire FR270 High Strength Structural Compound
  • Nullifire FR270 High Strength Structural Compound

Nullifire FR270 High Strength Structural Compound

350639

Nullifire FR270 High Strength Structural Compound is a single part gypsum-based compound providing up to 4 hours fire resistance. Nullifire FR270 has been fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classification 13501:2.

Colour
Size
£19.31
VAT excluded

£23.17 Tax incl.
Quantity

Description

Nullifire FR270 High Strength Structural Compound is a single part gypsum-based compound providing up to 4 hours fire resistance. Nullifire FR270 has been fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classification 13501:2.

Usage & Purpose

FR270 High Strength Structural Compound is used to stop the spread of smoke and fire along services that pass through compartment walls and floors, whilst providing an unsupported load bearing capacity. The system also provides thermal, acoustic and air sealing performance. FR270 is suitable for the following service penetrations; single and bunched cables, cable trays, cable ladders, trunking, steel and copper pipes, unsupported multiple ducting/ damper penetrations, PVC and uPVC pipes.

Typical areas of use include health and leisure facilities, schools, universities, commercial. retail and industrial buildings.

Limitations

For spans greater than 1800 mm or seals that require a UDL in excess of 2.5 kN/ m2, please contact Technical Team for support. 

Features & Benefits

  • Fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classification 13501:2
  • Suitable for rigid and flexible walls
  • Acoustics up to 50 dB
  • Rapid setting, zero shrinkage formulation - can be used as pourable or trowel grade
  • Minimum 25 years working life as per ETAG 026 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
350639
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Firetherm Intubatt 3

Firetherm Intubatt 3, rock-fibre ablative-coated slabs for installing in floors or walls for up to 4 hours fire resistance. Low cost and simple install For vertical applications, only the double-coated option should be used Fully tested at Exova BM TRADA up to 4 hours fire integrity Easy to cut Fully identifiable using Optifire...

Price £22.56
In stock

Envirograf Intumescent Fan Cover

Intumescent Fan Covers for electrical ventilation extractor fans in walls or glass, with a grille that expands in fire, sealing openings to prevent the spread of fire and smoke for up to an hour. See sizes below For wall-mounted and window-mounted electric fans Fits most leading makes - VentAxia, Xpelair, etc. Required under UK Building...

Price £151.68
In stock

Protecta EX Mortar Fire Rated Compound

Protecta EX Mortar, a highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca,...

Price £13.97
In stock

Envirograf Intumescent Glazing Channels

Intumescent Glazing Channels for high noise & vibration areas, absorbing sounds and movement more efficiently. Intumescent material expands in fire to seal up gaps and prevent spread of smoke and fire. Refer to sizes below Held in place with hardwood or softwood beading 10mm channel height up to 30 minutes fire rating 15mm channel...

Price £8.15
In stock

Firetherm Intutac

Firetherm Intutac bonds structural steel and ductwork protection boards in internal situations Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970 Supplied in a 10 litre tub (1.7KG per litre)

Price £89.70
In stock

Envirograf FB/TS Cavity Barriers

FB/TS Cavity Barriers are backed with self-adhesive, simply pushing into place. Intumescent expands across cavities to seal against fire & smoke, up to 120 minutes. Ideal for party walls and floors and timber frames with brick, timber or tile facings. Non-fibrous Cut to length Self-adhesive backing Completely waterproof 1m length...

Price £16.14
In stock

Envirograf Replacement Hardwood Door Edging

Envirograf Replacement Hardwood Door Edges are supplied to fit doors with a thickness between 40mm and 56mm, and it is supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke available for gaps 3mm, 5mm, 7mm and with brushes available for other gap sizes. Ideal for use in heavy-traffic areas prone to damage,...

Price £55.24
In stock

Envirograf Protective Covers for Works of Art

Use Envirograf's Protective Covers for Works of Art give smoke and fire protection to works of art, such as pictures, busts, statues and ornaments. They have been used at Eltham Palace in South-East London to protect a late 18th century grand piano, a grandfather clock, a sculpture of Virginia Courtauld, and even a massive oak dining table...

In stock

Envirograf Intumescent Letter Box Units

Intumescent Letter Box Units provide fire protection on doors for businesses and homes. The fireproof letterbox unit protects against fire and smoke for up to 1 hour; lockable letter flaps are available allowing the rear of the fire rated letterbox to be fastened shut, preventing materials from being posted through with the intention of...

Price £35.92
In stock

Envirograf Weather Bar Seal

Use a Weather Bar Seal to guard against weather and draughts under doors. Easy fix Applies to bottom edge of doors Use in conjunction with Envirograf Products 106 and 107

Price £5.94
In stock

Envirograf Firobond Ultra Adhesive

Firobond Ultra Adhesive bonds a wide range of materials and substrates, including all woods and joints, in fire protection applications. Bonds mineral wool insulation Magnesium oxide/cement boards Fully cured in 24 hours Thixotropic, for easy application

Price £17.14
In stock

Envirograf Board for the Protection of Steelwork

Use this Board for the Protection of Steelwork for extra fire protection of steelwork and metal ducting. Price is per board Refer to size guide below Sheet size: 1000mm x 1200mm Easy cut with a sharp knife Non-fibrous Can be faced with decorative laminates or painted Simply sticks into place

Price £46.38
In stock

Astroflame Intumescent Acoustic Acrylic Mastic

An easy to apply, intumescent sealant that provides a 5 hour fire barrier coupled with excellent sound reduction properties. Permanently flexible and excellent slump resistance it is ideal for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire rated structures.

Price £4.80
In stock

Firetherm Intustrap/Intuband

Intustrap/Intuband - Intumescent pipe wraps for sealing off combustible pipes during a fire to prevent the spread of smoke and flames. Easy to fit Available in rolls and strips Pre-configured pack for proprietary pipe sizes For metal and plastic pipes Expands when attacked by fire Fully tested for up to 240 minutes fire integrity and...

Price £5.64
In stock

Envirograf Soffit Board Intumescent Ventilator

These metal Soffit Board Intumescent Ventilators replace plastic soffit grilles, expanding in fire to fill gaps and voids to prevent the spread of fire to loft and roof areas. Refer to size guide below Circular and rectangular shapes Other sizes can be made to order

Price £13.99
In stock