Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes

Features & Benefits

• Simple, butt jointed and friction fit application
• No fixings, fasteners or angles required
• Suitable for closing voids of up to 1m in height and 20m in length
• Provides airborne sound reduction
• Service penetration data available
• Fire resistance of up to 4 hours integrity

Uses

• Head of wall
• Concealed voids
• Service penetrations

Standards and Approvals

• Independently tested and assessed to BS 476: Part 20 and Part 22 by accredited laboratories
• Achieves a reaction to fire classification of A1 as defined in BS EN 13501:1
• Third party approved for performance and quality by the Loss Prevention Council Certification board (LPCB) and are listed in their Fire and Security ‘Red Book’ - certificate no. 022c/02
• Authorised for use in LUL surface and sub-surface premises when installed in accordance with this data sheet

Application Notes

• For full installation instructions see the product data sheet and installation guide
• Fire Barrier Slab should be cut to the appropriate height and friction fitted within the opening
• Rockwool Acoustic Intumescent Sealant should then be applied to both the butt joints and perimeter of the barrier seal
• Can be penetrated by steel pipes of ≤ 33 mm external diameters and steel cable trays of ≤ 305mm x 50mm. Penetrating services must be independently supported by a maximum of 150mm from the face of the slabs
• Easy to handle and to cut to any shape. The product should be stored indoors or under a weatherproof covering
• Once installed the product should need no maintenance. Fire Barrier Slab should be inspected to ensure that they have not been disturbed during maintenance of areas and/or as part of a regular maintenance program

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.