- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Sikafloor ProSeal Pro
432241 , 432240
Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application. Click here for other Sikafloor products.
Features and Benefits:
- One coat application
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
**Available for delivery - see Delivery Options below**
Description
Sikafloor ProSeal Pro is a one part low odour clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete. Suitable for indoor or outdoor application.
Uses:
- Sikafloor ProSeal Pro is used for curing and sealing of fresh concrete floors.
- Provides curing and sealing for Sikafloor dry shake hardeners.
- Suitable for exterior and interior application.
Features and Benefits:
- One coat application
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Product Details
432241 , 432240
Data sheet
- Manufacturer
- Sika
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Concrete
- Application Method
- Spray, Roller
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 25L, 200L
- Application
- Brush, Roller, Spray
- Coverage
- 5 - 10m² per litre
- Touch Dry
- 8 Hours
- UN Number
- UN1866
 stephen on 2021-10-06 11:14:01 | Question:
can this product be usedon poer floated warehouse floor? |
Answer:
Power-floated concrete is normally considered to be non-porous, but if this is fresh concrete it may be applied. On old or hardened concrete abrasive blast cleaning will be required prior to application. | |