Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications.
606 Anti-Skid Additive
A specially produced ground glass aggregate to be broadcast/sprinkled by hand in to the thermoplastic material immediately after heating.
A specially produced ground glass aggregate to be broadcast/sprinkled by hand in to the thermoplastic material immediately after heating while surface is still 'wet' to provide increased skid resistant properties in both dry and wet conditions to improve safety.
• Ideal for wet and/or oily areas
• Does not affect the colour of the thermoplastic
• Produces a rough, non-skid surface
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Thermaline, a new preformed thermoplastic road marking, has been developed as part of the Ennis-Flint Thermoplastic products range. Thermaline compliments the road marking programme by its various uses and material makeup. Thermaline is ideal for areas with light traffic, such as playgrounds. It is an easy to apply, durable and cost effective...
A chlorinated rubber line marking paint that is perfect for line marking roads, sports surfaces, airports and playgrounds. Available in all RAL shades gives you the flexibility in its use. Advantages Good adhesion Excellent abrasion resistance Touch dry in 10 minutes
Coo-Var Acrylic W/B Road Line Paint is a low odour, fast drying, water-thinned acrylic resin-based line marking paint. ADVANTAGES Fast drying Low odour Exterior/Interior use Safer than solvent-based paint Ideal for when organic solvents are restricted
Elladur™ LM is a high-build, Polyaspartic/Polyurea fast-cure, line-marking system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. ADVANTAGES Fast cure at low temperatures Tough, yet flexible Low odour UV stable High build Can be used commercially/industrially Can be used on a range of substrates
A quick drying solvent based line marking paint based on durable resins and low odour solvents. Suitable for indoor and outdoor use, the product can be applied directly to tarmac, sealed concrete, wood and non porous substrates.
A durable and long-lasting marking paint available in an assortment of rich and aesthetically-pleasing colours, for use on cycle lanes or pedestrian walkways. The eco-friendly solution allows for both internal and external use. Possible Uses Driveways. Pedestrian areas and walkways. Cycle routes and paths. Indoor flooring and walkways.
Rust-Oleum Line Marking Paint Aerosols are designed for use together with the Rust-Oleum Line Marking Applicators. Rust-Oleum Line Marking Paint is ideal for drawing lines in parking areas, warehouses, sports fields, stadiums and all sites where traffic control is required.
Ennis-Flint PFT Overbanding is a skid-resistant overbanding and crack sealant preformed thermoplastic designed for application to asphalt surfaces to prevent water ingress and progressive fretting. Prevents water ingress instantly, and can be trafficked immediately. Cools and hardens within within minutes.
Ennis-Flint Prismo Temporary Road Studs are BSEN 1463 compliant with self adhesive stick-on pads for easy application. The stud body is fluorescent to give excellent day and night time visibility. Ennis-Flint Prismo Temporary Road Studs are used on contra flows and areas within road works to designate lanes.
Coo-Var Road Line Marking Aerosol Paint is a fast drying line marking aerosol for use on many surfaces. Available in six colours. An ideal line coating where speed and efficiency are important. Top Features Touch dry within 30 mins Overcoat in 2 hours 6 Colours to choose from
Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane...
Resuline is a high-build, fast-curing epoxy coating floor system for applying lines to surfaces. It has a high coloured gloss finish and minimum creep even on textured surfaces. ADVANTAGES One coat Fast setting Glass beads and clear aggregates can be applied Easy to use Colour stability 200 to 500 microns thickness Image already added
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of road markings, car park markings and cycleways.