Ennis-Flint Prismo II Road Studs
Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane demarcation.
Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane demarcation. Ennis-Flint Prismo II Road Studs lenses are well protected from damage by the stud body and they comply with BS 873: Part 4: 1987. They are available with white, green, amber or red reflectors in uni or duo-directional. Each stud is 100mm square and weighs 312gms.
Features & Benefits
- Will withstand the most arduous traffic conditions and is snow ploughable
- Highly cost-effective, will stay on the road surface and still reflect for years
- Approved by the Department of Transport for use on all types of roads
- Fixed to the road surface by an anti-twist stem
- 31 mirror backed glass lens
- Design permits regular cleaning by passing traffic
PLEASE NOTE: There is a 4 - 5 week lead time on this product and additional carriage charges may be applicable - please contact us for details.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Terry Williams on 27/12/2018|| |
I have a driveway that I prefer to reverse into. The near side kerb is very dark, it only about 20 feet long. I therefore only need about 6 of your studs to help my problem. Your minimum order is 80, is there any way you could supply a small amount?
Ennis-Flint Prismo Temporary Road Studs are available individually.
Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².
Fast drying, marking aerosols to be used on metal, concrete, asphalt, gravel, soil, grass, etc. Designed by Rust-Oleum for quick and easy marking of interior or exterior construction and excavation sites, underground utilities, traffic safety and more.
Rust-Oleum 2800 Ground Marking Aerosol can be used on metal, concrete, asphalt, gravel, soil and grass, etc. They are not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Rust-Oleum 2800 Ground Marking Aerosols are designed for quick and easy marking of construction and excavation...
Rust-Oleum Line Marking Paint Aerosols are designed for use together with the Rust-Oleum Line Marking Applicators. Rust-Oleum Line Marking Paint is ideal for drawing lines in parking areas, warehouses, sports fields, stadiums and all sites where traffic control is required.
Ennis-Flint Prismo Flexiline Letters and Numbers are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Prismo Flexiline Letters and Numbers provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any time of the...
Ensure a professional finish by using this propane gas burner from Rawlins Paints to apply thermoplastic markings. Supplied with hose, regulator and clips to attach to your gas canister.
Coo-Var Road Line Marking Aerosol Paint is a fast drying line marking aerosol for use on many surfaces. Available in six colours. An ideal line coating where speed and efficiency are important. Top Features Touch dry within 30 mins Overcoat in 2 hours 6 Colours to choose from
Ennis-Flint Prismo Flexiline is the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply from standard road markings, to personalised logos and graphics.
A quick drying solvent based line marking paint based on durable resins and low odour solvents. Suitable for indoor and outdoor use, the product can be applied directly to tarmac, sealed concrete, wood and non porous substrates.
Ennis-Flint Prismo Temporary Road Studs are BSEN 1463 compliant with self adhesive stick-on pads for easy application. The stud body is fluorescent to give excellent day and night time visibility. Ennis-Flint Prismo Temporary Road Studs are used on contra flows and areas within road works to designate lanes.
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of road markings, car park markings and cycleways.
This excellent slip-resistance paint has been specifically designed for the young budding Tim Henman's, with specific focus on enhancing youngsters' enjoyment of tennis. Advantages 3 Slip resistant rich colours. Matt finish. Water-based acrylic coating. Eco-friendly.
Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications.
Cataphos FS01 Acrylic is a durable, aromatic free chemical resistant traffic and airport marking paint which is suitable for use on both asphalt, concrete, aged blacktop, thermoplastic coverings, block paving, some wooden floors and most types of painted lines.