Alternatively you can email our sales & support team on [email protected]
Sika BituSeal Primer
469680 515659
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate. High adhesion and bonding ability on various substrates, good binding ability for dust and loose particles, ready to use by brush, roller or spray.
Sika BituSeal Primer is a bitumen solution primer to be used in conjunction with Sika BituSeal S-115 to increase adhesion and bond to the substrate.
High adhesion and bonding ability on various substrates
Good binding ability for dust and loose particles
Ready to use by brush, roller or spray
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
The Sika Plaster Drainage Membrane is a 5mm high-density polyethylene cavity drainage studded membrane used for internal fixing to masonry, stone or concrete walls. Suitable for over-plastering/rendering with sand/cement or with Sika Whitewall one coat anhydrite plaster. Easy to cut, fix and seal, unique undercut stud design creates mechanical key for...
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in basements,...
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant, resin-based paint for application to damp interior walls and ceilings. Designed as a primer coat.
ADVANTAGES
Combines with surface moisture and dampness
Preserves dry film
Reduces discolouration
Can be applied to surfaces still slightly damp
Can be...
SikaProof P-12 is a fully and permanently bonded, self-adhesive, post-applied, composite sheet membrane waterproofing system for reinforced concrete structures. It consists of a flexible polyolefin (FPO) based membrane that is pre-coated with an adhesive sealant layer so that the membrane system is self-adhesive. It is cold- and post-applied, without heat...
A problem solving coating for damp walls developed by Rust-Oleum. The paint is specially formulated to adhere and build a strong bond with the damp surface it is applied to, because it contains cement the moisture on the substrate actually helps the paint cure and become stronger coating.
SikaProof A Edge is a preformed L-shaped SikaProof A membrane sheet in 1m width folded in 50/50cm with a self-adhesive strip on both sides for a faster and easier application of perimeter edges, corners and connections. Used for damp-proofing, concrete protection and waterproofing for basements and other below ground concrete structures against ground...
The Sika Standard Drainage Membrane is an 8mm polypropylene studded membrane used for internal fixing to masonry, stone or concrete walls, dry lined walls, and as a floor membrane where limited water passage is anticipated. Provides a fast track waterproofing solution for walls or floors, suitable for use above and below ground, impermeable to water, gas...
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation.
The Sika Cavity Drainage System utilises a high density polypropylene internal drainage membrane, the system is installed loose laid in flooring applications and attached to the wall with surface plugs in vertical installations. Here you can find the associated accessories used with the Sika Cavity Drainage System.
Coo-Var Anti-Condensation Paint is a quick and easy protection of one-off areas that helps prevent the formation of condensation.
ADVANTAGES
Prevents the formation of condensation
Inhibits unsightly mould growth
Can be a finish or coated with emulsion or acrylic
Interior use
Biocide reduces discolouration
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength.
Thermilate InsOpaint Anti-Condensation Paint is a premium quality acrylic paint with very low odour levels and maximum thermal insulation performance that is perfect for all interior walls and ceilings and provides a U-value improvement of 0.25 W/m2K. Fights condensation problems including mould, blistering paint, discolouration, staining and peeling...
Sika BituSeal S-115 is a post applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non woven fabric. It has a silicone-treated release liner on the upper and lower surface. Sika BituSeal S-115 is designed for use as an underlayer in fully self-adhesive multi-ply...
