Sherwin-Williams Macropoxy M630V2 (formerly known as Biogard M630V2) is a water-based, two-pack epoxy gloss finish for interior use only, recommended for application to suitably sealed masonry walls, floors and ceilings. It may also be used on new and old concrete as well as previously painted surfaces and suitably primed steel.
Mathys Divalo is a tough, water based acrylic varnish to provide the finishing touch on interior wall paints when a high mechanical resistance is required.
- Not yellowing
- Smooth satin views
Mathys Divalo is a waterborne varnish based on pure acrylic resins to be used as a finish on indoor paints and decorative paint systems to provide a durable, high wear surface. Mathys Divalo does not yellow, has easy application with a roller or brush, produces a uniform finish and is washable.
Clean and degrease the substrate and apply Mathys Divalo in 1 or 2 coats as required, the paint coats or systems that have to be protected must be dry and/or fully cured.
Features & Benefits
- Not yellowing
- Smooth satin views
- Density: 1,02 - 1,06
- Gloss Level: Satin
- Gloss level at 60º: Satin Gloss: ± 20%
- Solids content in volume: 27,5 - 30,5 %
- Solids Content in weight: 30 - 33 %
Drying Times At 20°C/RH 50%
- Touch dry: 30 minutes
- Dry to recoat: 4 hours
- Fully cured: ± 1 week
12 - 14 m²/l
Practical coverage depends on many factors such as pososity and roughness of the substrate and material losses during application.
Clean and degrease substrate. The paint coats or systems that have to be protected have to be dry and/or fully cured.
Direction For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
> 5°C, max. 80% R.H
- Brush: Apply undiluted.
- Roller: Apply undiluted.
- Airless Spray: Nozzle: 09 - 013 / Pressure: 180 bars
- Air-Atomised Spray: If required dilute with water.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Water based
- Interior/Exterior Use
- Brush, Roller, Spray
- Dry to Recoat (at 20°C)
- 4 hours
- Fully Cured (at 20°C)
- ± 1 week
- 12m² per litre
- Min. Application Temperature
- 1,02 - 1,06
- Solids by Volume
- 27,5 - 30,5 %
- 90 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans. If stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 30 mins
- Recommended Dry Film Thickness
- ± 20 µm
- Recommended Wet Film Thickness
- ± 70 µm
- UN Number
- Not regulated
|David Hughes on 21/09/2016|| |
Question: Could this paint be used to protect emulsion paint which has been applied to a radiator, please? Best wishes David Hughes
Yes, but this will not have any affect on whether or not the paint will "yellow" as a result of the heat coming from the radiator.
503 Easy Clean Anti Slip Coating is a high-build epoxy resin coating containing a hard wearing fine particle anti slip additive that is pre-dispersed into the resin and held in suspension. The result provides a ready to use product that leaves an evenly textured, slip resistant surface that is easy to clean and extremely durable.
Sikagard Wallcoat N is a two part, coloured, water dispersed epoxy resin coating for interior concrete or cementitous wall surfaces ideal for production facilities, storage, car park and logistic areas etc. Features & Benefits Good chemical and mechanical resistance Good bond on damp surfaces Good opacity Water vapour permeable...
Thermilate InsOpaint Kitchen & Bathroom has been specifically formulated to provide premium protection against mould and bacteria growth typically found in kitchen and bathroom areas and provide high thermal insulation. Combined with world-leading insulating technology, this hard-wearing kitchen and bathroom paint also reduces heat loss through walls and...
Mathys Paracem Deco Soft is a high-quality semi-matt, warerborbe acrylic paint for application as a finish to interior walls. Excellent flow, resistant to scrubbing and washing and high covering power. Excellent flow Good mechanical resistance against rubbing Smooth semi- matt finish Closed coating structure, washable High covering...
Rust-Oleum Biosan Aqua Plus is a water-based 2-pack anti-bacterial topcoat for walls and ceilings where hygiene control is essential, like hospitals, kitchens, dairies, breweries, schools etc. Whilst offering exceptional abrasion resistance, it is also water dilutable, solvent free - almost odourless - and easy to clean. High build and...
Sikagard 405 W is a single component white, waterborne acrylic resin based coating containing an organic in-fim-preservative with a mid-sheen finish. Topcoat or stand alone coating for internal walls and ceilings - concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for pharmaceutical,...
Sikagard 406 W is a single component white, waterborne acrylic resin based surface coating containing an organic in film preservative with a mat finish. Topcoat or standalone coating for: internal walls and ceilings for concrete, bricks, cement based and gypsum substrates, metallic surfaces, timber, tiles and plastic. Suitable for...
Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required. Rust-Oleum's hard wearing, washable...
Mathys Paracem Deco Prestige is a waterborne, extra matt, good coverage and good washable ceiling paint. Suitable for surfaces with incident light or floodlight. It is a light insulating paint and prevents the bleeding of the most water-soluble stains.
Zinsser Perma-White paint is a durable, water-based, very low odour finish containing a biocide that protects the dried coating against mould and mildew - guaranteed for 5 years. It is ideally suited for any area of persistent high humidity, frequent temperature changes and poor air circulation. Available more than 350 colours from RAL and...
Rust-Oleum Dacfill Frigo is a gas & vapour tight coating for walls and ceilings, ideal for use in cold stores. Rust-Oleum Dacfill Frigo has high vapour and gas tightness with permanent high elasticity of up to 400%. It offers resistance against sudden variations in temperature and exhibits high mechanical strength. Ideal for cold stores...
Sikagard 403 W is a single component, waterborne modified acrylic resin based intermediate and surface coating, containing an antimicrobial additive. Features and Benefits Seamless, easy to clean finish Good resistance to repeated cleaning regimes using mild detergents and cleaning solutions Tough and highly durable Good water vapour...
Rust-Oleum 8700 Hygienic Acrylic Topcoat is a water-based single pack hygienic topcoat designed and developed by Rust-Oleum which protects walls and ceilings against normal humidity and contamination indoors. Offers better protection against contamination than non-hygienic paint Very fast drying and recoating times (3 coats in a day)...
A water based, low odour, non-flammable, colourless sealer for interior brick and masonry surfaces to seal and protect. Ideal to prevent crumbling and dusting, produces a stain resistant, cleanable surface.