Teamac Hull Blacking is a high quality, bitumen based coating for hulls. Suitable for Narrowboats, cruisers and any inland waterway.
Teamac Hull Blacking is a high quality, bitumen based coating for hulls. Suitable for Narrowboats, cruisers and any inland waterway.
Can be applied to suitably prepared Wood, Steel and Cast Iron. Can be used without a Primer/Undercoat; can only be over- coated with another bitumen based product.
| Product Data | |
|---|---|
| Typical S.G. (Specific Gravity) | 0.89 @ 20 °C |
| Volume Solids | 50% |
| Wet Film Thickness W.F.T | 80 microns |
| Dry Film Thickness D.F.T | 40 microns |
| Expected Spreading Rate | 12 sq.m / litre @ 40 microns DFT (By brush application) |
| The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application. | |
| Typical Viscosity | 2.6 to 3.5 Poise - C&P @ 25 °C |
| Flash Point | Above 32 °C (closed cup) |
| Voc Content | 420g / litre |
| Drying Time @ Recommended D.F.T | |
|---|---|
| Touch Dry | 3 hours @ 20 °C |
| Hard Dry | 12 hours @ 20 °C |
| Full Hardness | N/A |
| Low temperature and high humidity will adversely affect application, drying and performance of any coating. | |
| Minimum Overcoating Time | 12 hours or overnight |
| Application Details | |
|---|---|
| Method | Brush or roller |
| Thinner(Max vol) | Do not thin |
| Cleaning solvent | Thinners 14 |
| Recoat interval | 12 hours or overnight |
All surfaces should be clean, dry, sound and free from contaminants. New wood should be sanded prior to coating to ensure an adequate "key" is produced.
Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Mix well before use.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
N/A
Teamac Hull Blacking.
Overcoating with conventional solvent based paints will result in black bleeding through.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Teamac Hull Blacking is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...
£12.73 (incl. VAT)
£10.61 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
