Bonda G4 Thinners
Bonda G4 Thinners is used for thinning G4, Bondaseal Clear, Woodseal and 15 Year White.For thinning all G4 productsMore Information Delivery Info
£9.91 (incl. VAT)
£8.26 (ex. VAT)
Bonda Marine G4 Primer and Sealer performs a vital function as a primer when bonding fibreglass to wood, metal, and concrete.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Bonda Marine G4 Primer and Sealer performs a vital function as a primer when bonding fibreglass to wood, metal and concrete.
Apply to clean, dry and well-prepared surfaces and leave until finger tacky then apply polyester resin and glass fibre. Also, when applied to wood as a continuous film it forms a non-porous plastic coating which is tough and flexible.
Technical Data | |
---|---|
Bonda Marine G4 Primer and Sealer | |
Coats | After a single coat, apply polyester resin and glass fibre |
Drying Time | 60-90 minutes |
Re-coating Time | Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats |
Application Temperature | Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C |
Coverage | 500g/sq.m |
Maintenance | Not applicable |
Compatibility | Compatible with G4 Thinners |
Settlement | Shake well before use |
Shelf Life | Many years if suitably stored unopened in original container. NOTE: this is a moisture hardened product, so storage life of opened tins is limited |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Andrew on 2021-11-06 21:20:35 | Question: Hi, would G4 primer be good to prime the edge of ply so I can apply silicone, are they compatible? Many thanks |
Answer from Rawlins’ Technical Team: This is normally used as an adhesion aid on timber, metal or concrete substrate prior to applying fibreglass. In regards to applying silicone after it is applied, we would recommend testing for compatibliltiy and adhesion prior to full application. | |
Bonda Marine G4 Primer and Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Bonda G4 Thinners is used for thinning G4, Bondaseal Clear, Woodseal and 15 Year White.For thinning all G4 productsMore Information Delivery Info
£9.91 (incl. VAT)
£8.26 (ex. VAT)
Rustins Cellulose Thinners are a special blend of pure solvents that will mix with any make of cellulose lacquer. Does not contain any xylol, toluene or any other petroleum derivative and is not classified as a petroleum mixture.Pure solvent For the dilution of cellulose paints and lacquers Used as a cleaner for certain products in the...
£27.22 (incl. VAT)
£22.68 (ex. VAT)