Teamac Teamalak Yacht & Seaplane Varnish

540/V601/27

Teamac Teamalak Yacht & Seaplane Varnish (previously known as Teamalak Yacht Varnish), is a high gloss, high quality traditional marine gloss, UV resistant varnish.

Advantages

Colour
Size
Finish
£22.89
VAT excluded

£27.47 Tax incl.
Quantity

Description

Teamac Teamalak Yacht & Seaplane Varnish (previously known as Teamalak Yacht Varnish), is for use on all wood surfaces where a high gloss, UV resistant finish is required e.g. yacht woodwork and furniture.



Click To Jump To Section:




Features & Benefits


Advantages



Product Specification


Technical Data
Volume Solids 49%
VOC Content 393 g/litre
SG 0.92°C
Viscostity 2.5 Poise @ 25°C
Flash Point Above 32°C (closed cup)



Film Thickness Range And Coverage


Product Data
  Dry Film Thickness Wet Film Thickness Theoretical Coverage
Maximum 30 - 35 µm 70 µm 14 m2/litre @ 35 microns D.F.T.



The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.



Drying Times


Drying Times At 20°C/RH 50%
Touch Dry: 6 Hours
Dry To Handle: 24 Hours
Dry To Recoat: 12 hours or overnight
Fully Cured: 5 - 7 Days



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants.
  • New wood should be sanded prior to coating to ensure an adequate "key" is produced.
  • Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.



Preceeding Coat


  • Teamac Teamalak Yacht Varnish direct to prepared wood.



Mixing


  • Mix well before use.



Application Conditions


  • As dictated by normal good painting practice.  In confined spaces, provide adequate ventilation during application and drying.



Application Methods


Method Airless Spray Conventional Spray Brush Roller
  Yes No Yes Yes



  • Thinner (Max vol): Thinners 14 (5%) - Brush, roller and airless spray.
  • Nozzle Size: 0.013"
  • Nozzle Pressure: 1800 to 2000 psi
  • Cleaning Solvent: Thinners 14



Health & Safety


See safety data sheet - SDS 10610 in the attachements section above.

Click to go back to the top of the page

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
540/V601/27

Data sheet

Interior / Exterior Use
Interior and Exterior
For Use On
Wood
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L, 5L
Interior/Exterior Use
For interior and external use
Suitable Substrates
Wood surfaces
Key Features
Interior and exterior use. Can be used over existing paintwork to increase gloss finish.
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
24 Hours
Dry to Recoat (at 20°C)
12 hours or overnight
Fully Cured (at 20°C)
5 - 7 Days
Coverage
14m² per litre
Recommended Thinner/Cleaner
Thinners 14
Solids by Volume
49%
VOC
393 g/litre
Touch Dry
4-6 Hours
Finish
Full Gloss
Size
0.5 litre, 1 litre, 2.5 litre, 5 litre
Recommended Dry Film Thickness
30 - 35 µm
Recommended Wet Film Thickness
70 µm
UN Number
1263
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send