We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Tor HB Zinc Phosphate White is a quick-drying corrosion-resistant finish for machinery that provides good coverage and fast drying times, able to be overcoated after just 30 minutes.
A blend of alkyd resin pigments with inorganic pigments, including zinc phosphate, and extenders and thinned essentially with Xylene to facilitate application
Corrosion-resistant finish
Originally used for NCB (National Coal Board) underground equipment
Zinc-rich high-build
Quick-drying
Touch dry and ready to overcoat in just half an hour
Tor HB Zinc Phosphate White, a quick-drying corrosion-resistant finish for machinery that was originally used for NCB (National Coal Board) underground equipment. The zinc-rich high-build coating provides good coverage and quick drying times, able to be overcoated after just 30 minutes.
Originally used for NCB (National Coal Board) underground equipment
Quick-drying
Touch dry and ready to overcoat in just half an hour
Hard dry after 2 hours
Apply using airless sprayer
Refer below for application and preparation
Up to 10.75 square metres per litre
Product Information
A blend of alkyd resin pigments with inorganic pigments, including zinc phosphate, and extenders and thinned essentially with Xylene to facilitate application.
Product reference
AK488
Volume solids
43%
Typical thickness
40 microns dft from 93 microns wet
Theoretical coverage
10.75 square metres per litre
Practical coverage
Reduce theoretical coverage by up to 20%
VOC content
2004/42/EC - IIA/i: 500g/l (2010). <= 500g/l VOC.
Surface Preparation
Steel:
Steel - Grit blast to SA2.5 Swedish Standard to remove all contaminants including mill scale and provide a profile of 50-75 microns.
Mechanically chip, scrape and wire brush to Swedish ST2 standard followed by thorough degreasing using Tor TH19.
Application Details
Mix ratio
N/A
Method of application
Airless spray using 0.015" tip and 2000 psi atomising pressure. Air spray can be used on dilutions with up to 20% TH19. Material is electrostatic quality as supplied)
Note: Drying/curing times will be shortened by higher temperatures and lengthened by lower temperatures
Storage and Handling
Store the closed containers in a store room which is either in a safe place or is a fire resisting structure. The storage and conditions must meet the statutory requirements of The Highly Flammable Liquids and Petroleum Gases Regulations 1972.
Flash point
Between 23°C-32°C
Shelf life
2 years in unopened containers
Limitations
Must be stored in accordance with The Highly Flammable Liquids and Petroleum Gases Regulations 1972.
Avoid skin and eye contact i.e. wear gloves, goggles, etc
Ensure good ventilation, mechanical if necessary
Store and use away from heat and flame
Do not eat or smoke in the vicinity of work
Wash hands before eating
Refer to supply container for additional warning labels
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor HB Zinc Phosphate White is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Tor QD Thinner (TH19) is for the thinning (where necessary) of Tor Quick Drying Machinery Primers and Finishes and for the cleaning of the same materials from application equipment. Can also be used for degreasing metal components prior to painting.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...